underpigeons R us

[DanClarke]

I'm getting a range rover it's fockin brilliant in here

You aren't allowed one. It's NOT tratterish enough for you.

 

[1988smithy]

You aren't allowed one. It's NOT tratterish enough for you.

I'll tek the seats out the back and install a pig

 

[Saint.V8]

I'll tek the seats out the back and install a pig

It is more bullish and 'unrefined' in here than most people think....we just do it sipping Kopi Luwak, smoking Cuban Cigars and throwing peasants on the fire to keep the Range Rover warm in the garage.

 

[1988smithy]

It is more bullish and 'unrefined' in here than most people think....we just do it sipping Kopi Luwak, smoking Cuban Cigars and throwing peasants on the fire to keep the Range Rover warm in the garage.

Well if you don't mind I'll leave me pig at the door, roll a fag and bring me home brew I did in the bath

 

[Saint.V8]

Also, what is the feebay number for yours???

Listing ended Thursday - chap has contacted, money is sitting in Paypal account - just waiting for him to pick it up!

 

[Saint.V8]

VCU???

do enlighten please

The Viscous Coupling Unit sits in the transfer box and allows the front and rear propshafts to rotate at different speeds - like a differential - BUT if the speed difference is great enough (like a slipping wheel in mud etc) then the Viscous FLuid inside thickens and begins to lock both propshafts together to allow them to be driven at the same speed and with an equal split of torque fore and aft.

Over time, the VCU can seize up solid and this can lead to transmission wind up snapping stuff - usually diffs - as it no longer allows the front and rear axles to turn at different speeds during cornering...BANG!

Running with a prop removed for extended periods 'simulates' the shafts turning at different speeds and as such the VCU is permanently in a locked up state which it was never designed for....cooking the poor thing!

 

[jamesmartin]

The Viscous Coupling Unit sits in the transfer box and allows the front and rear propshafts to rotate at different speeds - like a differential - BUT if the speed difference is great enough (like a slipping wheel in mud etc) then the Viscous FLuid inside thickens and begins to lock both propshafts together to allow them to be driven at the same speed and with an equal split of torque fore and aft.

Over time, the VCU can seize up solid and this can lead to transmission wind up snapping stuff - usually diffs - as it no longer allows the front and rear axles to turn at different speeds during cornering...BANG!

Running with a prop removed for extended periods 'simulates' the shafts turning at different speeds and as such the VCU is permanently in a locked up state which it was never designed for....cooking the poor thing!

it is linked to a differential

 

[Datatek]

The VCU locks the centre differential output shafts progressively when there is a rotational difference between front and rear output shafts.

 

[Mongo]

Pardon me snowflake you posted & asked for opinions on that motor & I looked at it for 2 mins an thought why has the front
prop been missing for years vcu prob right away & so that will cost you money plus it has air issues & abs issues plus a months mot what else is hiding underneath?? I was trying to help you out as this is what you asked for or did I miss something.

Mongo by name Mongo by nature !!!

Cheers

snowflake???

laughable.

my post was relating to issues that aint obvious.

 

[Mongo]

OP should have stated that they were asking only for opinions they wanted to hear.

Schoolboy error.

not at all buddy... I just think it's pointless telling someone about blatantly obvious points... I'd stated the airbag issue so why comment on it... MOT history is basic so why comment on that, more so as a separate issue can lay behind the prop shaft, yet no mention was made by he

 

[Mongo]

The Viscous Coupling Unit sits in the transfer box and allows the front and rear propshafts to rotate at different speeds - like a differential - BUT if the speed difference is great enough (like a slipping wheel in mud etc) then the Viscous FLuid inside thickens and begins to lock both propshafts together to allow them to be driven at the same speed and with an equal split of torque fore and aft.

Over time, the VCU can seize up solid and this can lead to transmission wind up snapping stuff - usually diffs - as it no longer allows the front and rear axles to turn at different speeds during cornering...BANG!

Running with a prop removed for extended periods 'simulates' the shafts turning at different speeds and as such the VCU is permanently in a locked up state which it was never designed for....cooking the poor thing!

thanks for that, well explained.

I'll assume that it's already fooked, hence the prop being missing.

so it's currently a rear wheel drive only rangey... not that bad given that saaf eest lundun ain't got no mahntins to drive up!

So roughly, what's the cost involved with putting the vcu issue right?

 

[wammers]

not at all buddy... I just think it's pointless telling someone about blatantly obvious points... I'd stated the airbag issue so why comment on it... MOT history is basic so why comment on that, more so as a separate issue can lay behind the prop shaft, yet no mention was made by he

It's up to you then, but there maybe a grands worth of repairs that are obvious. Others unknown. That is why they are selling it cheap. That is why they are not repairing it to sell, to recoup they would have to sell it at a much higher price than the market value. They are possibly making a little on the value they traded it in for.

 

[Henry_b]

 

[Henry_b]

1k for that heap of shít no way i'd give him £300 for it

 

[Mongo]

It's up to you then, but there maybe a grands worth of repairs that are obvious. Others unknown. That is why they are selling it cheap. That is why they are not repairing it to sell, to recoup they would have to sell it at a much higher price than the market value. They are possibly making a little on the value they traded it in for.

I get that... but the airbags and prop are out in the open so stating them as fact is pointless... talking about the vcu on the other hand is not, and that's the sort of thing I was looking for... Dunlop airbags are about 90 quid each, issue with the pump then Labour charges, I'd say about 500 quid should cover it.

vcu... that's unknown, but the head lining is about 150 to replace. there's so many of them sagging that a few people have started businesses that cater to the problem, so no more cans of furniture glue to spray on and hope for the best.

it's an old car so it's never gunna be showroom condition, certainly not for a grand, but like the flat that grandma died in, it's a fixer upper.

 

[Henry_b]

I get that... but the airbags and prop are out in the open so stating them as fact is pointless... talking about the vcu on the other hand is not, and that's the sort of thing I was looking for... Dunlop airbags are about 90 quid each, issue with the pump then Labour charges, I'd say about 500 quid should cover it.

vcu... that's unknown, but the head lining is about 150 to replace. there's so many of them sagging that a few people have started businesses that cater to the problem, so no more cans of furniture glue to spray on and hope for the best.

it's an old car so it's never gunna be showroom condition, certainly not for a grand, but like the flat that grandma died in, it's a fixer upper.

There are better ones out there for a grand..

Just keep looking.

 

[wammers]

I get that... but the airbags and prop are out in the open so stating them as fact is pointless... talking about the vcu on the other hand is not, and that's the sort of thing I was looking for... Dunlop airbags are about 90 quid each, issue with the pump then Labour charges, I'd say about 500 quid should cover it.

vcu... that's unknown, but the head lining is about 150 to replace. there's so many of them sagging that a few people have started businesses that cater to the problem, so no more cans of furniture glue to spray on and hope for the best.

it's an old car so it's never gunna be showroom condition, certainly not for a grand, but like the flat that grandma died in, it's a fixer upper.

And how much do you think a VCU is if you can get one and how much to fit it, then you need a new front prop. Has the VCU being seized damaged the front diff. If you get it and can do the jobs yourself maybe viable. But garages will rip you off for fun.

 

[wammers]

https://www.johncraddockltd.co.uk/r...cous-unit-in-transfer-box-remanufactured.html

 

[Mongo]

And how much do you think a VCU is if you can get one and how much to fit it, then you need a new front prop. Has the VCU being seized damaged the front diff. If you get it and can do the jobs yourself maybe viable. But garages will rip you off for fun.

 

[Mongo]

the car in my front garden is a 1968 coupe, which I'm modernising... Lexus ls400 engine and gearbox, prop shaft to be cut, re-wiring, then there's the rear axle, which is coming off a Jensen interceptor, as it will give me rear discs, which is better than drums and shoes.

Think I might be able to sort out the front prop!