a727 auto box early Range Rover

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Juno8888

New Member
Posts
9
Location
Yorkshire
trying to find supplier of filters, gaskets, for this Gearbox in uk that are reasonably priced, what are the correct parts numbers etc, any help would be appreciated, photos etc
 
trying to find supplier of filters, gaskets, for this Gearbox in uk that are reasonably priced, what are the correct parts numbers etc, any help would be appreciated, photos etc

That will be the old three speed unit. Look for Chrysler Torqueflite spares.
 
That will be the old three speed unit. Look for Chrysler Torqueflite spares.
Hi thanks, but that’s what I have been doing and nothing that resembles box pan I have which appears to be factory ? Haven’t seen my filter yet so don’t know what’s it looks like. So was hope someone on here has specific part number and photos plus a supplier ? There’s loads of Chrysler spares mostly for the US but no direct reference to the early Range Rover 3 speed Chrysler ???
 
60BF6B81-F349-4E9B-BAAD-9A473329F3EE.png D1E43097-6BE6-4A82-BD1D-5F662D1F15BA.png
trying to find supplier of filters, gaskets, for this Gearbox in uk that are reasonably priced, what are the correct parts numbers etc, any help would be appreciated, photos etc
72DB39AE-655B-4CB7-8787-0DDA32A40EE9.png
 
Hi thanks, but that’s what I have been doing and nothing that resembles box pan I have which appears to be factory ? Haven’t seen my filter yet so don’t know what’s it looks like. So was hope someone on here has specific part number and photos plus a supplier ? There’s loads of Chrysler spares mostly for the US but no direct reference to the early Range Rover 3 speed Chrysler ???
sump gasket -frc5711
filter screen-aeu2448
any more just ask
when i used to rebuild those ,i used to get the parts from an american parts importer in norfolk,full rebuild kits were cheap you just needed to specify the spec /use
 
sump gasket -frc5711
filter screen-aeu2448
any more just ask
when i used to rebuild those ,i used to get the parts from an american parts importer in norfolk,full rebuild kits were cheap you just needed to specify the spec /use
Hi thanks for that it’s a good start :)
 
Back
Top