What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yesterday evening I found a bit of time to start assembling my external temperature display/ adjustable FBH controller project. I must say, the finished article will look pretty smart.
Here's a sneak peek, powered from my bench supply.
20180201_222832.jpg
 
Yesterday evening I found a bit of time to start assembling my external temperature display/ adjustable FBH controller project. I must say, the finished article will look pretty smart.
Here's a sneak peek, powered from my bench supply.
View attachment 140843
I hope you can give us the details on how you incorporated that internal temperature display - very very nice! :D
 
I have a rear view mirror with the temp and compass built in that I brought for my previous car from the US but am a bit concerned that it might be a little long (get in the way of the sun visor) @Nodge keeps us updated this looks like something I would like to have a go at if mine is to big
 
I have a rear view mirror with the temp and compass built in that I brought for my previous car from the US but am a bit concerned that it might be a little long (get in the way of the sun visor) @Nodge keeps us updated this looks like something I would like to have a go at if mine is to big

Lots of US made SUVs have temp displays in the rear view mirror. Mine is also a FBH controller, which is something that I wanted.
Updates will continue, when I get more spare time.
 
This past weekend I tried out a wifi obd transmitter using an I-phone on the dash. It's interesting seeing the various readings in real time.
It did make me realise that the values are not a lot of use without knowing what they should be. I will have to do a bit of research.
One that jumped out was the engine temperature which showed my V6 running at 105-110 degrees C. That seems a bit high to me. Opinions?

One thing I did find was that I should have ordered one of the stubby style transmitters as on my LHD Hippo the longer unit fouls on my right (throttle) foot.
I have an extension cable on the way so will have another go when that arrives.
 
This past weekend I tried out a wifi obd transmitter using an I-phone on the dash. It's interesting seeing the various readings in real time.
It did make me realise that the values are not a lot of use without knowing what they should be. I will have to do a bit of research.
One that jumped out was the engine temperature which showed my V6 running at 105-110 degrees C. That seems a bit high to me. Opinions?

One thing I did find was that I should have ordered one of the stubby style transmitters as on my LHD Hippo the longer unit fouls on my right (throttle) foot.
I have an extension cable on the way so will have another go when that arrives.

Most V6s in the UK run between the high 90s to about 105 in moving traffic. If you get stuck in slow traffic, 110 isn't uncommon. Keeping an eye on it is important as it could signify the thermostat is beginning to fail.
 
Thanks Nodge! It runs bang on the center line of the temp guage now but I will keep a close eye on it.
As bad a job as changing the T-stat is I would rather do that than change the head gaskets!
Is it worthwhile going for one of the alloy T-stat housings when changing the stat?
 
Thanks Nodge! It runs bang on the center line of the temp guage now but I will keep a close eye on it.
As bad a job as changing the T-stat is I would rather do that than change the head gaskets!
Is it worthwhile going for one of the alloy T-stat housings when changing the stat?

Yes if you can find them. The original Rover made stat was an alloy unit. Sadly it got dropped when BMW took over and was swapped to the crappy plastic unit. The inlet plenum was also originally alloy too, sadly that want the same way as the thermostat. :(
 
Today I finished my interior mirror temperature display/ FBH controller project. It's taken a good few hours to complete, but I'm more than happy with the results. So now not only do I know what the outside temperature is, but can set the FBH to assist the heater at a temperature I want it too.
Here's the end result.
20180204_144016.jpg
 
Last edited:
Just bought it yesterday, so today I have fitted new mats, mobile phone holder and a USB 4 port hub, and have ordered...
new side steps, new stereo, new wheel centre caps, roof bars and and elm327 bluetooth adapter. still on amazon and ebay though so this list might increase as the night goes on haha. oh, and the bairn has a chrome autobot symbol to stick on somewhere as well haha.
 
Just bought it yesterday, so today I have fitted new mats, mobile phone holder and a USB 4 port hub, and have ordered...
new side steps, new stereo, new wheel centre caps, roof bars and and elm327 bluetooth adapter. still on amazon and ebay though so this list might increase as the night goes on haha. oh, and the bairn has a chrome autobot symbol to stick on somewhere as well haha.

It's best to make sure it's in correct working condition before spending on frivolities. 4 identical tyres are essential or the 4X4 system goes bang.
 
This arvo I investigated problems with the n/s front window mech (slow and keeps getting stuck). Not the first person in there - the plastic had been cut and taped up by Ray Charles by the look of it... Ran the motor, and head the distinctive noise of broken gears/teeth from the mech, as well as a small but definite could of plastic dust emanating from it. New unit is on it's way for £28 all in inc. postage. That'll be next weekend's job.
 
Just bought it yesterday, so today I have fitted new mats, mobile phone holder and a USB 4 port hub, and have ordered...
new side steps, new stereo, new wheel centre caps, roof bars and and elm327 bluetooth adapter. still on amazon and ebay though so this list might increase as the night goes on haha. oh, and the bairn has a chrome autobot symbol to stick on somewhere as well haha.
Maybe get a bluetooth tyre pressure monitoring system. That might save you £££ in the future.
 
It's best to make sure it's in correct working condition before spending on frivolities. 4 identical tyres are essential or the 4X4 system goes bang.

Yeah, cheers fella - getting it booked in for next weekend for next weekend for a full set of tyres and an alignment - and I am ordering a refurbed VCU this week just to be on the safe side. Had a couple in the past so I remember a few of the things to keep an eye on :)
 
Back
Top