clutch slave push rod

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Arr

New Member
Posts
22
Location
Victoria BC Canada
Anyone know if there are two lengths of push rod for the clutch slave cylinder?

I've heard there is a push rod length difference between the LT77 and the R380/ZF bell housings. Not a big difference mind, but there none the less. Anyone confirm/deny?

Rgds
JD
 
I DO NOT need a new push rod!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I DO NOT need a new slave cylinder!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The simple question is, about a possible length difference.

??
JD
 
Don't have two part numbers in my older copy of Rave and don't have micro cat. I'm posting here because other avenues have not been forthcomming. Hoping someone else has heard or knows of this.

JD
 
Even if he did get a new slave cylinder, which he won't cos he dunt need one as he so articulately pointed out, he wunt be any betterer off cos you don't get a pushrod wiv em.
 
come on, Grunt - even the most dim witted peep cud buy two on the understanding he cud take the wrong one back!

but i aint sure he wants one - just wants to know if there are different length ones.
 
He could buy two push rods I spose, but he could buy a brazilion cylinders an he still wunt get any push rods. Unless of course the stor (did you notice how I slipped easly int fluent Merkin with the "Stor" bit) . Where was I......Oh aye, unless of course the stor had a special offer on, like "buy a Brazilion slave cylinders an get two different length push rods at half price. Dyer think the stor will be in a Mall?
 
Back
Top