Coils to Bags part 2

[Ruby Range]

to continue i looked around this morning and have a compressor unplugged, a valve block, all 4 tubes to the four corners and a air tank. I could not see the height sensors (where would i find them) ? The real questions are what other major components do i need. Obviously the 4 bags which i figure at about £100 a corner but is there anything else i need to look for.
Also can i test the compressor by just re connecting it and seeing if it pumps out air to all four corners without upsetting anything. At present on start up i have the message EAS manual mode a bit of bleeping and then nothing else. the ride height switch do,s not illuminate when moved but the flat tyre symbol ?? next to it illuminates when pushed.
I would like to hear from anyone who has gone the reverse route to what most people do to see if it was a fairly easy job and was the ride so very very differant.

 

[wammers]

You can get a full set of bags for about £225.00 from Island 4x4 near you.

 

[Ruby Range]

Cheers wammers, will have to look at there site to see exactly what they do. sorry the post was a little confusing, bloody dog jumped on my lap and posted it for me and didnt realize you can edit once posted. any thought on the other questions old royal !!!

 

[wammers]

Cheers wammers, will have to look at there site to see exactly what they do. sorry the post was a little confusing, bloody dog jumped on my lap and posted it for me and didnt realize you can edit once posted. any thought on the other questions old royal !!!

Look at the top of the Range page you will see Technical Archive select and look down that for my EAS "How to" follow the guides in that for testing things.

 

[tomcat59alan]

The "flat tyre" switch is to lock the suspension when towing so if you do over 50 mph it doesn't lower itself onto the jockey wheel of the trailer/caravan.

 

[wammers]

The "flat tyre" switch is to lock the suspension when towing so if you do over 50 mph it doesn't lower itself onto the jockey wheel of the trailer/caravan.

By pushing it in you can also select motorway height below 50 MPH.

 

[tomcat59alan]

By pushing it in you can also select motorway height below 50 MPH.

I'll try that tomorrow, you learn something every day. If you don't your not listening or your dead.

 

[wammers]

I'll try that tomorrow, you learn something every day. If you don't your not listening or your dead.

It will stay in motorway height until EAS lock is deselected. Makes it look cool when you is on McDonalds car park with da mates.

 

[Ruby Range]

"But Da Mates is so low in da Saxo" but missing 4 cylinders

 

[tomcat59alan]

It will stay in motorway height until EAS lock is deselected. Makes it look cool when you is on McDonalds car park with da mates.

I have always taken it over 50 then locked it. I don't av mates, I have a posse down at Burger King, see you there

 

[tomcat59alan]

"But Da Mates is so low in da Saxo" but missing 4 cylinders

How do they pass the MOT with no suspension travel? Compacted spines on the horizon.

 

[wammers]

I have always taken it over 50 then locked it. I don't av mates, I have a posse down at Burger King, see you there

You can't select motorway on the button under normal circumstances other than as you say then lock it. But if you press lock you can then select it on the height button.

 

[wammers]

How do they pass the MOT with no suspension travel? Compacted spines on the horizon.

They wouldn't if i was doing the test.

 

[tomcat59alan]

They wouldn't if i was doing the test.

I like a man who bears a grudge.