R380 and transfer box breathers

[cowasaki]

I've been fitted a breather kit and now have both axles and the timing belt cover pipes going to the engine bay near the snorkel....

I just need to locate the breather pipes from the gearbox and transfer box. I have couplers and the kit says cut the existing pipe and push it into the coupler then use the new pipe to the engine bay to join all the others. Once they are all there I will plumb them into the snorkel or the roll bar.

I've had the landy up on ramps to do both axles and pulled all the pipes through but cannot find any breather pipes off either box.

 

[The Mad Hat Man]

read yo other fred!!!!

look on side of gearbox by the difflock linkage - should be 2 black plastic 6mm pipes going up to back of engine - cut, fit a 2-1 adapter and route new length to snork.

 

[cowasaki]

read yo other fred!!!!

look on side of gearbox by the difflock linkage - should be 2 black plastic 6mm pipes going up to back of engine - cut, fit a 2-1 adapter and route new length to snork.

Thanks.........

I have. Will sort it tomorrow.

 

[The Mad Hat Man]

did it work?