I'm after fitting a vdo oil pressure gauge. So need the thread to get the correct adapter. I think m10x1 is correct based on anything iv seen so far.
Yeah plan is to reuse the std one too. Vdo is also 10x1
Yeah plan is to reuse the std one too. Vdo is also 10x1
Will do. Spec is meant to be 3bar at idle when cold, 1.5-3 bar at 3500 rpm when hot. Taken from Haynes
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!