New Height Sensor.

[Rachelkgr]

No support in Kent, so having to go the expensive route and replace every damn component in EAS.

I have a 2001 DHSE, so assume two of these are correct for the front?

Front Height Sensor (VA346794 on) ANR4686 Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.

It says after a certain chassis number, but can't match any of the numbers to mine?

 

[Datatek]

No support in Kent, so having to go the expensive route and replace every damn component in EAS.

I have a 2001 DHSE, so assume two of these are correct for the front?

Front Height Sensor (VA346794 on) ANR4686 Island 4x4 - Specialists in Land Rover and Range Rover Parts and accessories for all models. UK and worldwide mail order.

It says after a certain chassis number, but can't match any of the numbers to mine?

Easiest way is to phone Island with your VIN and let them sort it.

 

[Rachelkgr]

Ok... Thanks Keith

 

[wammers]

They are the correct ones. Only two types up to 97 and 97 on.

 

[gfromleeds]

Post 98 are the ones without the wire the plug is built into the unit so the linky you posted is the right one

 

[wammers]

Post 98 are the ones without the wire the plug is built into the unit so the linky you posted is the right one

Sensors changed in MY 1997.

 

[gfromleeds]

Sensors changed in MY 1997.

yea I knew it was around there but would imagine during 97 some rolled out with and some without the new sensors but mine is a 98 plate and definitely has the new ones
straingly though I had the dash off the other day and most of the dash parts on the back are stamped early 99 ??
I had suspicion of this over something else before but cant remember what it was now

 

[Rachelkgr]

Thanks guys, I know this won't fix my EAS fault, but in for a penny. Or £112!

 

[Datatek]

Thanks guys, I know this won't fix my EAS fault, but in for a penny. Or £112!

Mine just pulled a fault today, looks like a rear sensor doesn't like the rain

 

[gfromleeds]

Thanks guys, I know this won't fix my EAS fault, but in for a penny. Or £112!

£112? Whats that for?

 

[gfromleeds]

Mine just pulled a fault today, looks like a rear sensor doesn't like the rain

it it worth taking it off drying it out and at least trying to reseal it?
You can at last use wd40 for what it was designed for lol

 

[Datatek]

it it worth taking it off drying it out and at least trying to reseal it?
You can at last use wd40 for what it was designed for lol

If it's not the connector, it will be the O rings failed. They have done 115K miles so I'm happy to fit new. Did the fronts ages ago.

 

[gfromleeds]

Fair nuff
Might be difficult to get one at this time of year though

 

[Datatek]

Fair nuff
Might be difficult to get one at this time of year though

Not worried, cleared fault and it has not come back.