Wide angle or dc?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
double de cardon joints are a constant velocity joint.
they are not for more extreme angles they are for when flange angles are to far out of parallel with each other to be overcome with changing the phasing on a standard hooks type(ordinary) joint, typically the front prop as the drivetrain angles are way different.
 
is it not as broad as it is long?
wide angle, only 2 UJS, but each UJ is doing more work, so life will be less.
DC, twice as many UJs, but only doing "normal" amounts for movement
 
I had this convo with Gwyn Lewis and came away with 2 wide angled Bailey Morris props.
He said the DC props were more prone to failure, so wide angled it was.
 
wide angle is good for 2-3" lift without corrected radius arms, above that and with corrected arms double cardon as it cuts down the vibration that corrected arms cause,
but dont expect a disco2 double cardon to be upto the job
 
Back
Top