Eas

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

JohnnyCrash

New Member
Posts
1,917
Pump/compressor stopped working while driving last night. Car is now sat on its bump stops and I can't drive it :-(

fuses ok, relay fine

not sure my EAS software is working correct, anyone in the Manchester area that can help??
 
linked the green and black up - compressor sprang into life

can hear it shifting plenty of air

any ideas??
 
Linked them up to what the battery? Orange wire is thermal cutout. Don't put that to live at all. Thermal switch is possibly knackered. Test continuity orange to black wire if non it is stuffed.
 
Last edited:
Linked them up to what the battery? Orange wire is thermal cutout. Don't put that to live at all. Thermal switch is possibly knackered. Test continuity orange to black wire if non it is stuffed.

thanks

Tested - we have continuity across black and orange

What's next??
 
Tested relay - working fine, replaced with a new one

the relay doesn't click when I start the car or ignition live

Pressure switch and fuse is the only thing left in the circuit to check then apart from ECU.
Have you checked for a good bond to earth of black lead behind EAS box on inner wing.
Check fuses 24,29,35 and 40.
 
Last edited:
Screenshot2012-09-15at173922.png


Rangie.jpg


all sorted now

Thanks Wammers you are a star
 
Last edited:
Back
Top