aux belt pully bearing

[wickford90]

Can you get a bearings for the pulleys or do i need to get the wheel with a bearing in, looks like it should push out, bearing seams to be standard 6303.
any ideas.

 

[Shifty1962]

Never tried it but it should push out. The pulleys are not made with them in situ and I doubt its a purpose made bearing.

 

[wickford90]

Never tried it but it should push out. The pulleys are not made with them in situ and I doubt its a purpose made bearing.

Been told its a standard bearing, will get some and try and fit. Let you know if works.

 

[wickford90]

Well that was a doddle, knocked out old bearing with 30mm socket, get two new bearings , thought I would change other as well, pushed it in part way in a vice then tapped it home with 32mm socket. Got tucked up on price of bearing from local bearing sales paid £38 for the two, found them for £5 each on eBay.

 

[Shifty1962]

Excellent! Glad its sorted.

 

[Rean]

we do it all dhe time, replacement is simple, although after the second or third replacement the inner stretches and the bearing becomes too loose, so then we replace ... our fleet of game viewing vehicles work in the delta and hence need the bearings done every service or before