elsie
Well-Known Member
- Posts
- 1,300
- Location
- the very wonderfull Conwy Valley
Left it well alone , maybe it will start in the am !!!!
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 13,800
Yesterday, changed the wheel bearing. Well technically speaking, I undid the wheel nuts......(.Ratty, I'll love you forever for your handmade wheel nut undoer ......... You get a cake of choice at the Bristol show 
).. Couldnt do the actual bearings themselves as they were a bit stuckified then I got the job of tea bitch and then I got to fill the new bearings with grease. . Final job was putting the nuts back on.
So whilst I can't claim to have done it all myself I did get mucky hands and watched it all and asked lots of stupid questions.
).. Couldnt do the actual bearings themselves as they were a bit stuckified then I got the job of tea bitch and then I got to fill the new bearings with grease. . Final job was putting the nuts back on.So whilst I can't claim to have done it all myself I did get mucky hands and watched it all and asked lots of stupid questions.
Yesterday, changed the wheel bearing. Well technically speaking, I undid the wheel nuts......(.Ratty, I'll love you forever for your handmade wheel nut undoer ......... You get a cake of choice at the Bristol show
So whilst I can't claim to have done it all myself I did get mucky hands and watched it all and asked lots of stupid questions.
Well done, hope ya treated the vic.. i mean lovely person that gave yu a hand.... small animals like treats.
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Hey, ya got mucky and gave it a go. Bearings can be a bit#$ sometimes.
What its all about.
What its all about.
robint
Well-Known Member
- Posts
- 7,057
i want to know hwo had the blowie then
Oh I took piccs but at the moment they are on somebody elses camera, watch this space.......:nopics:
I can see whats creeping up on me, on my passenger side now.
Studog81
New Member
- Posts
- 23
- Location
- South cave
Fitted a raptor
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
I took it greenlaning yesterday, ran into a broken trio of hilux surfs so I sat and laughed at them with Phoebe cos they were lying in the rain for about an hour removing the front prop
so I sat and laughed at them with Phoebe cos they were lying in the rain for about an hour removing the front prop
I took it greenlaning yesterday, ran into a broken trio of hilux surfs
Dads mate has a hilux, in fact it's here now being fixed, absolutely ****e, it gets confused by wet grass, wheels just spin
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Dads mate has a hilux, in fact it's here now being fixed, absolutely ****e, it gets confused by wet grass, wheels just spin
These were all heavily modified, one was running a rear locker, front LSD with pickup axles, 8" lift and 37" tyres. Pointless on a greenlane tbh, none had snorkels though which confused me. You'd think if you're making a heavy duty offroader you'd put a snorkel on it
ratty
I'm not special I'm limited edition
- Posts
- 34,277
I took it greenlaning yesterday, ran into a broken trio of hilux surfs
If the wuss under the umbrella-ella-ella got right under the vehicle he wouldn't need the brolly.:confused2::whoosh::bump2:
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
He was under it for a bit but had to come out and get a breaker bar
I had a chat to him and he was running a bodged front prop/diff I think so no wonder it broke. All I remember was he said something had been welded together in that area then they drove it up from wales :doh: the front axle locked up and he had rear drive only so it had to be dismantledEven mine has a snorkel..... but it isn't connected up:bolt:
blue beasty
Leaks an prone to bits dropping off
- Posts
- 61,274
- Location
- Gloucestercotshirewolds
Yesterday, changed the wheel bearing. Well technically speaking, I undid the wheel nuts......(.Ratty, I'll love you forever for your handmade wheel nut undoer ......... You get a cake of choice at the Bristol show
So whilst I can't claim to have done it all myself I did get mucky hands and watched it all and asked lots of stupid questions.
So long as each time you learn something new and your understanding of how things work deepens a little then there will come a point where it'll all start to click together and you'll intuitively know what every Landy mechanic must...
When you can hit it with a big hammer and when you can't!
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
haha but at least it has one!
aw68
Member
- Posts
- 30
- Location
- derbyshire
(yesterday) Took the Hicap to Padley wood pay and play! Great fun with my nearly-bald BFG trac edges. Wheel spinning everywhere in that mud.... I was well impressed with it in general though. (When I wasn't sat waiting for it to cool down!)
List of jobs - get some proper wheels/tyres and sort out the cooling system. Electric fans? New radiator...probably...
List of jobs - get some proper wheels/tyres and sort out the cooling system. Electric fans? New radiator...probably...
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Took the viscous fan off, next job will be to fit the leccy fan I'll get on that before summer arrives
I'll get on that before summer arrives
