No heater blower...very cold

[West Slope Rover]

id check the resistors ......but why not check the fan motor...but if you switch it to air..and the other fans dont come on mayby the switch is bad... the fan plug is behind the condenser ..but i know it sucks when its cold...and the heater dont work...had that when i first got mine...when you switch it to air ...does the compressor kick on???
but if it was me...and im kinda nuts...and i could feel the heat ...but no fan....id hot wire the blower motor....to get me through the winter....good luck ...

Is there a way to check the fan motor without taking out the dash?

 

[mikieman]

on the u.s. version range rover the heater assembly the blower motor is on the left side
it has a long electric connector with a five pronged plug...the bottom 2 prongs a black and a red wire go to the blower motor..it has a connector by the firewall behind the condensor fan...i have removed the large pad in the dash to gain access to the plug...but it is a pain
i also had to stick my arm through the defrost vent next to the pad and under the dash...to unplug the connector... again im nuts...but stuborn.. get to this point...and you can check your blower motor...and hook up a switch till summer....im sure there is someone out there with a much better suggestion.....and here are a few pics ..hope it helps....

 

[mikieman]

so are you in colorado or england???
and do you look on landrovers only???
it pretty good..

 

[West Slope Rover]

so are you in colorado or england???
and do you look on landrovers only???
it pretty good..

I'm in Colorado. I've only looked at it when it comes up on a google search. Never joined or posted there.

It's hard to beat this place. It's, um, different.

 

[West Slope Rover]

And thanks for your help. It's much appreciated.

 

[mikieman]

your welcome...

 

[West Slope Rover]

I'm now wondering if might be a BeCM hiccup.

 

[mikieman]

havent heard of that...but i like it... explore all options...check into it...

 

[Datatek]

I'm now wondering if might be a BeCM hiccup.

A quick look at RAVE seems to suggest the the BECM is not involved, the blower fans are driven direct from the HEVAC.