Suffolkandgood
New Member
- Posts
- 449
- Location
- Hertfordshire
Knobrot
Today I have fitted raised axle breathers, nothing exciting but still good fun!
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Knobrot
Today I have fitted raised axle breathers, nothing exciting but still good fun!
gricey
New Member
- Posts
- 99
- Location
- welwyn garden city , hertfordshire
lol pot kettle
pot kettle 
ratty
I'm not special I'm limited edition
- Posts
- 34,277
I spent another day driving mine around the island today. It's so nice to be able to drive it every day.
I saw the disco today but the occupants wuz all AWOL when I drove by. I have a sneaky suspicion that they thought they'd spotted me though cos when they pulled away later on they slowed right down when passing a parked up white 110 csw. It weren't me though cos I was behind them.
oh yes - congrats to Fleck :d
yu dint see a green disco full of kids and two distraught girlees on ya travels - did ya?
I saw the disco today but the occupants wuz all AWOL when I drove by. I have a sneaky suspicion that they thought they'd spotted me though cos when they pulled away later on they slowed right down when passing a parked up white 110 csw. It weren't me though cos I was behind them.
- Posts
- 4,201
- Location
- North Norfolk
Just fitted my snorkel, a lot easier than expected 2 hours start to finish..even got the doris involved anorl
I might get my coat back one day
Still got to run the axle breathers up it and make sure it's fully airtight but the scary bit (cutting holes in me car) is done.
I might get my coat back one day
Still got to run the axle breathers up it and make sure it's fully airtight but the scary bit (cutting holes in me car) is done.
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
Just fitted my snorkel, a lot easier than expected 2 hours start to finish..even got the doris involved anorl
I might get my coat back one day
Still got to run the axle breathers up it and make sure it's fully airtight but the scary bit (cutting holes in me car) is done.
bet she was all excited when you said you had a fur coat for her to keep the cold out
:doh:
- Posts
- 4,201
- Location
- North Norfolk
bet she was all excited when you said you had a fur coat for her to keep the cold out
lol
I bought that for meself but never got the chance to wear it
- Posts
- 4,201
- Location
- North Norfolk
would this be work done before the plains thread barmatt??
Kinda, I'm using the plains trip as an excuse to add some bits I've wanted for a while
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
lol
I bought that for meself but never got the chance to wear it
why not buy her 1 that fits her better
- Posts
- 4,201
- Location
- North Norfolk
![[JP]](/data/avatars/m/29/29578.jpg?1437394565){kind=avatar}
[JP]
New Member
- Posts
- 3,980
- Location
- Newbury, Berks
why is she snorting the wing? lol
Kinda, I'm using the plains trip as an excuse to add some bits I've wanted for a while
:lol: good excuse.
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
had a "little" parcel waiting from paddocks when i got home this after
glad to see the back of those 2 insa turbo special tracks off the front and get full set of the 285 m/t's on the old 90
glad to see the back of those 2 insa turbo special tracks off the front and get full set of the 285 m/t's on the old 90
- Posts
- 4,201
- Location
- North Norfolk
had a "little" parcel waiting from paddocks when i got home this after
glad to see the back of those 2 insa turbo special tracks off the front and get full set of the 285 m/t's on the old 90
ooohhh me likey them.
mikescuba
Well-Known Member
- Posts
- 2,731
- Location
- France, Loire, Rhone Alpes
I felt like giving my Landy a wash and polish today, so I went and laid down till the feeling passed. I'm ok now.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Had another day of driving mine around the island. The ballast decided that she wanted to have a go at driving too so I even got a white knuckle ride thrown in too.
Finally got the f***ing bottom crank pulley un-done! 3/4 Bar with a 30mm Impact Socket and a 10ft Scaffold bar on it.... + 15 Stone pulling on it!
Had to make myself a nice little locking tool, which worked really well and held the crank
Had to make myself a nice little locking tool, which worked really well and held the crank
Last edited by a moderator:
easye1
Banned
- Posts
- 8,557
ouch......Finally got the f***ing bottom crank pulley un-done! 3/4 Bar with a 30mm Impact Socket and a 10ft Scaffold bar on it.... + 15 Stone pulling on it!
Had to make myself a nice little locking tool, which worked really well and held the crank
v-dub aircooled flywheel bolt - they do one that bolts through starter bolt hole/gearbox bolt hole, and locks into 2 starter ring gear teeth.
think it used 34mm socket, 3/4 bar also, and same scaffold bar too!
has to be done up silly tight for an old v-w......
Fur Trapper
Banned
- Posts
- 8,481
- Location
- international
those old VW 60-70's had 4 bolts to crank shaft think a 15mm socket
easye1
Banned
- Posts
- 8,557
thanks for the info fur trapper, but I remember helping my son undo the single flywheel bolt to replace the O ring oil seal on one of his v-dubs..those old VW 60-70's had 4 bolts to crank shaft think a 15mm socket
more in here...
http://www.vw-resource.com/flywheel.html
Last edited:
