Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    For Sale Freelander 1 17" alloys with good tyres.

    Hi all Alloy wheels as pictured to suit Freelander 1 from 2001 onwards. Tyre size 225 55 17. General altimax sport tyres, all fairly close on tread at between 5.3 and 6.3mm. Spare is new and unused general grabber gt. Looking for 200 quid, happy to arrange courier at buyers cost or meet for...
  2. M

    Disco 2 The effect of engine vibration on ACE??

    Hey all Ive got two issues in the go at the moment, both of which i have open threads on. I have a noisy ACE system which sounds like its ticking when engine is at idle speed, the frequency of the tick increases with RPM and the zystem now drones noisily on cornering. Other issure is engine...
  3. M

    Td5 injector balancing?

    Been reliably informed today that my 2001 disco td5 vibration issue is down to a slight imbalance on injector 4...but I'm happy as it seems dual mass flywheel isn't fooked after all. I was thinking to plump for new injector there and then but then thought would that be hasty? Could it be a dodgy...
  4. M

    Disco 2 Dual mass flywheel vibration?

    Hey all. I'm hearing a vibration going through the disco both at idle and when on the move and does vary with rpm. Nothing on auxy belt pulleys of any concern but felling around it does feel like it's originating around the clutch housing. Anyone suffered the same symptoms of clutch or dfm...
  5. M

    Disco td5 2001 front axle seal leak.

    Another day in the paradise of disco ownership :) Front passenger side axle seal has gone. Going by manual looks straight forward drawing out drive shaft but are the special tools for insertion of new seal required? Grateful for any advice as always.
  6. M

    Disco td5 weird ACE issue.

    Had the disco on the road for the first time in over a week today. Was a long journey and towing trailer and we'll into journey started to noticed some noise/ vibration on cornering. Quick look see and when I first stopped noticed that faint drone at idle that accompanies my ACE was gone and on...
  7. M

    Discovery td5 GS 2001 - for sale but needs repairs.

    For sale. GS spec and runs great, fairly clean for age as can be seen in photos. 125k miles. Few issues as follows: Spigot bearing noise on cold start, as always, goes away after a minute or two. Clutch and gear change unaffected, Minor engine oil leak, suspect from sump gasket. Air Con losing...
  8. M

    Freelander td4 GS 2003

    As promised, pics after a bit of tlc and wiping off kids fingerprints. Great vehicle, just under 120k miles, only issues electric sunroof sealedand gearstick auto-return a bit sticky, havent got round to freeing up. Feel free to ask questions, being viewed by potential buyer tomorrow. £2000.
  9. M

    Time to flog the old girls!

    Sad days coming up soon, im going to be putting my 2001 disco td5 (owned for 8 years) and my 2003 freelander td4 ( owned for over 6 years) up for sale. Part of the reason ive kept these cars for so long is because of the help and advice from this forum so before they go up for sale locally...
  10. M

    td5 outrigger ruined my day

    Well it was only a matter of time.. The MOT inspector got out if wrong sidecof bed this morning and knocked **** out of my poor old disco with a hammer and turns oyt one of my outriggers us fooked. Im pretty sure this is a common problem yet I cant find a supplier of ouriggers pre-fabricated...
  11. M

    Caliper guide pin bolts for 2000 onwards.

    Ive tried to look this up but seems the right answer was never given but someone must have done this. I want to change the bolts on my 2003 td4 which secure the caliper to the ends of the sliding/guide pins as the heads on mine are gettin fooked due to rust. I picked up part SYG000010 from...
  12. M

    Rythmic thud at 70mph...weird

    Having managed to get the new prop shaft bearings on before christmas was very pleased. Also managed to get new discs and pads done...mintex,.what an improvement. Anyway having done a christmas card run, up and down dual carriageway, down country roads etc was feeling very pleased with all...
  13. M

    How to identify a GKN prop shaft bearing?

    Having had an issue this week with "grinding/rumble" at low speeds, I have been sniffing around tonight to find that my prop shaft bearings have perished rubbers and are markedwith athe letters BJS. I had my vcu and bearings renewed by a local indy last year at this time and they did inform me...
  14. M

    Wanted- Diagnostics for D2, Hawkeye/ nanocom

    I know not many like to part with them but anyone thinking of selling drop me a PM.
  15. M

    3 amigos reset after shuttle valve mod

    I carried out the shuttle valve mod today as I have been having issues with 3 amigos intermittantly. The 3 amigo are still on. Has anyone ever carried out this mod but still had to do a reset with diagnostics afterwards to get back to normal? Note that I havent moved the disco from garage...
  16. M

    Manky ACE fluid

    My ACE has been a bit "whurrier" than normal lately. Perhaps just the cold weather but thought id change out the fluid in the tank altho the fluid is only a year and a bit old. Surprised to see this. Prob result of full pipework changeout. Still to drive again to see if whurring is reduced.
  17. M

    MOT time again...blue sidelights anyone?

    Its that time of year again. As the proud owner of a 2001 td5 and 2003 td4, I always look forward to their MOTs. Disco tomorrow and freelander monday. Has anyone had any bad MOT experiences lately and are VOSA hot on any particular issues?I went over the disco chassis the other day and gave it a...
  18. M

    MOT time again....am I ready? blue sidelights?

    Its that time of year again. As the proud owner of a 2001 td5 and 2003 td4, I always look forward to their MOTs. Disco tomorrow and freelander monday. Has anyone had any bad MOT experiences lately and are VOSA hot on any particular issues? I went over the disco chassis the other day and gave it...
  19. M

    Td5 clutch slave cylinder fault?

    Following my post yesterday where I suspected my clutch may be one the way out after long time noise from spigot bush, today when I first went out I the car I tried a couple of things. As usual on cold mornings the spigot bush was droaning away. I pumped the clutch pedal a couple of times and...
  20. M

    td5 clutch renewal.

    Well its finally happened. Its fair to say ive had the morning spigot bush moaning going on for zome time altho it never actually affected the drive of the disco. This morning however was a different story. The usual moaning followed by a bit of juddering and clutch slipping which settled down...
Back
Top