Search results

Looking for a little guidance, I was checking my 1997 disco 300tdi and found a leak on the leak off pipe banjo connector, metal pipe, I got a replacement and connected all the new leak off nozzles only one snapped off when I was tightening it. I thought I might have to take the injector out to...

Re-posted in 300tdi forum. Cheers Twin

Can anyone tell me what the lever on the side of my 1998 disco 300tdi injection pump is for? A springed arm off the throttle arm goes thru it as can be seen in the picture. I did have an EGR valve but that has been removed and blanked off. The top end of the pump was off to replace the body seal...

I ordered a replacement lift pump for my 1998 300tdi disco, when it arrived it has the pipes that require 8mm olives while the one currently fitted has the threaded ports. All listings put my 1998 disco as having the pump with the pipes on it so why does the current one have the threaded ports...

Woke up this morning to find my dipped headlights on, went out to switch them off and found that the lights were switched off, rear lights are off just dipped on so had to disconnect battery. Heard its possible to disconnect a relay which may be faulty and everything should be ok as its not...

I recently had an mot failure on my 1998 300tdi disco the usual tin rot which has been sorted I may add that the fuel tank had to be removed to weld the rear x member, then a fuel leak at the injection pump leaking at the body which again has been fixed, only thing is when I tried to start the...

I have been offered 195 80 15 tyres for my 200tdi series 3 are there any major disadvantages to using this size? I currently have 7.50 16 on,to be used for off road or in the snow the 195 would be used for good weather on the road. cheers

Hi all, Looking for a little help, I have just converted my 1979 series 3 swb to a 200tdi with turbo. The 200tdi is from a discovery 1 and the radiator has seen better days, but the series radiator is in very good nick, and would like to use it but obviously doesn't have an oil cooler can...

I have a 1979 series 3 88" station wagon with galvanised chassis and have acquired a discovery 1 200tdi rolling chassis c/w withe all the props diff and axles, 200tdi and gearbox. Is it possible to convert the series to use the 200 tdi and gear box? obviously I dont want to touch the chassis...

Hi I have entered the world of land rover owner ship and acquired a rather nice condition 1979 series 3 88". i will be looking to convert to a 200tdi but will be running it with its 2.25 diesel for a while first. So many thanks in advance for all the helpful advice I`m about to receive .