Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. CarlosVanDango

    steering box P38/defender/disco

    hi, after a bit of info anyone know if a defender or disco steering box drop arm will fit on a P38 steering box? basically looking for a longer steering arm to fit a P38 pas box cheers
  2. CarlosVanDango

    track rod end taper size

    yeah i could do that but i was thinking there might be a known measurement already that wouldn't be subject to any measuring errors but i have since found out it is the same as the anti roll bar link
  3. CarlosVanDango

    track rod end taper size

    hi can anyone tell me the dimensions of the taper on the steering bar Track Rod End on the discovery and defender its part number RTC5869 and RTC5870 i know the thread is 11/16" and the nut to hold it on is M12 but its the size and degrees of the taper i'm after so i'd be able to have a part...
  4. CarlosVanDango

    non pas serpentine belt length

    p38 box with series 3 axle standard 300 pump
  5. CarlosVanDango

    non pas serpentine belt length

    well the other vehicles are a disco and a range rover with 300's and factory boxes- will they be too hard to steer? mine is really light with the pas you can easily turn it with 1 finger
  6. CarlosVanDango

    non pas serpentine belt length

    whys that james? mines a series with a pas conversion when i 1st had it running i drove it without the pas pump and it was roughly the same as the old series steering
  7. CarlosVanDango

    non pas serpentine belt length

    we are doing a long trip with a few land rovers running 300tdi's we were talking over spares to take we were thinking about a spare pas pump but then thought if we had a pas pump seize could we just fit a shorter belt and leave the pas off? just a get us back home idea the idea being carrying a...
  8. CarlosVanDango

    will 16x8" -35ET wheels fit?

    quick question will 16 X 8" wide with -35ET fit under the standard arches on a defender and if anyone has a picture of one with them fitted i'd appreciate it you could post it and if they do fit what tyres did you fit on them cheers :)
  9. CarlosVanDango

    Series 3 Electric Power Steering

    impressive work, i can't see a problem, your doing such a well engineered job i can't see it failing at all, the pas motor part is the most likely failure but that's irrelevant if it fails as you will still have full steering control The only thing you have altered is the splines/joints it's...
  10. CarlosVanDango

    Series 3 How best to secure & immobilise a Series 3 petrol?

    me? i used a normal one just a pay as you go
  11. CarlosVanDango

    Series 3 How best to secure & immobilise a Series 3 petrol?

    i'll not say where i fitted mine but put it this way put it where you most want it and test it - you'd be surprised some have a battery in but i guess the £11 one doesn't (also some are waterproof) if it doesn't have a battery they when they disconnect your battery it will stop it working...
  12. CarlosVanDango

    Series 3 How best to secure & immobilise a Series 3 petrol?

    yes you can but they wont leave it parked up with a signal blocker on they will only use that when they are driving in it i'm not saying with a tracker you'll always get it back but it makes it a higher chance you will and at £11 + £5 for a PAYG sim you'd be kicking yourself if it got nicked...
  13. CarlosVanDango

    Series 3 How best to secure & immobilise a Series 3 petrol?

    get a tracker ive got one you can get them for under £20 (look on ebay) put a PAYG sim in it every time you ring it it texts back with the exact location, ive not had it in long but every time ive tested it it's been within a few yards a lot of cars stolen to be stripped are often nicked and...
  14. CarlosVanDango

    Series III brake light switch problem

    hi sorry for the late reply i'd forgot i'd replied to this anyway better than a picture a video of mine
  15. CarlosVanDango

    Series III brake light switch problem

    i had this issue so i fitted a peugeot 106 one like this https://www.ebay.co.uk/itm/BRAND-NEW-Black-Housing-Brake-Light-Switch-Rear-Safety/273434290106?epid=7004781864&hash=item3fa9f427ba:g:U90AAOSwjKFZXm9M:rk:1:pf:0 its fitted to loads of french cars - i made a really simple bracket that picks...
  16. CarlosVanDango

    Stood for 20 yrs - 109 series 3 resto thread.

    thanks, i am using for a bit of light offroading, already taken it laning round peak district for a test run a couple of weeks back and it did ok i made a couple of tree sliders for it last week to help protect the sides also use if for general work, towing carrying heavy stuff etc.i do...
  17. CarlosVanDango

    Stood for 20 yrs - 109 series 3 resto thread.

    just a quick update, ive got this done now, well on the road and working MOT'd etc. still got a lot to do but this is a fairly recent picture :)
  18. CarlosVanDango

    Series 3 help identify this bit

    yes thats defiantly the bit thanks
  19. CarlosVanDango

    Series 3 help identify this bit

    do you mean the rear most side facing seats? that would make sense as I've not got any fitted in mine now
Back
Top