Search results

Im runing out of ideas .starts runs fine but oil stick is raiseing with oil ive removed injectors .and replaced with geniune seals and copper sealing washers and torqued to spec Problem still here I bit the bullet and bought a brand new clyinder head bolts.gaskets and another set of...

today removed head again .double checked height and bore .defo ...no problems marks or scores. so i made a compression tester evern thow i know rear back clyinder showed buggar all. firsty i removed camshafts and 2 rockers from the exhaust bank . retested compression gauge shot up.i then...

ots a on going with the d3 tbh nearly a year ago now.when is were these parts were replaced..any companies that can problery check for camshaft movement

discovery 3 tdv6.dealers garages not having mutch luck and the bills are riseing fast. my engine isnt fireing on 2 banks (ns) middle are rear near bulk head .starts first turn of the key but is just injecting diesal and isnt fireing .just dumping it down exhaust and smoking bad. parts its so...

Found part of the fault .i remove the alti terminal (12vred feed) and it starts fine if i replace it dosent start .so i plugged live data to notice when engine cranks ecu is reciveing 17volts .i assumed this was wrong .so i went to have the alti checked guy couldnt find a fault.(i was sure it...

Personaly im not the type todrive fast .but a my 2002 d2 seemed sluggish i drcided to hve a remap ..after i hd remap done .ive noticed a problem .this happernds up hill down hill and driving on a traight long road .if i drive half throttle vechical with change threw the gear ok .but if i floor...

Noticed my td5 was a little lumpy from cold starting .and found all glow plugs were dead .i added new ones .and now i dont have the heater light showing at all in the morning .also checked the fuse which is fine .any ideas why light worked until i aded new heater plugs ? Unless it works off a...

Top man john ....many thanks...

Top man john .ill go and see steve ridge way to code them in ps looking at the gren top injectors which is the correct code as there numbers on both parts of the injector

Just a quick one few injectors went down on my 2002 discovery 2 15p engine .i end up just fitted a full set of 5 .and i was suprized as it starts and runs great ? I assumed they needed codeing to work on my vechical ?

2.89 for convertor off ebay .works a treat .mind thrres also another plug square approx 6 small pins .witch was plugged in under the iso conector?

Very helpfull advise .really greatfull for the time to help with this issuise .today before i attempted .removing bcu unit .i decided to start over and double earths .unbolt fuse box re chech all pluvs conections clean removed roof lining double checking earths and plug conections as well as...

Crazy how every was fine and following morning suddernly central locking stops .no b sign poped up this morning but still no locking ..werid everything else works

Cheers .ps if i remove the bcu ( think thats what its called) will it lose any codeing .also if i get a second hand one can this be recoded .. Removed complete roof lining .4 hour job .just to double check for any dampness or leaky sunroofs there dry ..

unsure what you mean tbh . Any easy test or fix

Just letting u know changed fusebox and roof reciver .b fault still shows so ill book it in gor bcu replace and recode .fingers crossed it sorts problem

I think ur right ..as centralocking wont work off fob or work when unlocking car .and the internal central switch dosent either .unless i switch igition on first then all doirs will lock unlock off the dash switch but not of the fob ...dam thing .right so this b symblo .relates to bcm or...

Cheers peter tbh checked all fuses in fusebox under driverside dash and under bonett .looks like snother book into dealers to be sorted .bloody things these are ..

Battery check tested local motist says its fine starts runs great .replaced gearbox ecu no dsh beeps do sorted something there.bttery in remotes are tested all good.remote keys are switching immo on nd off but no centrelocking fuse 1 replaced in f1 but wasnt blown. Is there any relys for...

Central locking was fine and all doors worked come this morning to unlovk led flashers on key fob and removes immbo light and ibterior light comes on .but wont work off the key .if i use the dash door switch .nothing st all.if i switch igition on snd press switch all doors will lock and unlock...