Search results

Changed the front crankshaft seal and oil cooler + pipes the other day which all went ok. On the way to work (10miles) I noticed the oil light starting to flicker on and off pulled over turned the engine off and back on again and all was fine then it started again. The car was running fine...

Having appeared to have solved (hopefully) the auto gear box fault I still have a problem, is the rev limiter set at a certain limit (4000rpm ish) or does it change depending on speed/load/throttle position as this is what's happening at the moment whether I am towing our 25ft caravan or not...

Having problems with my auto box, I'll do my best to describe what happens and what I have done. When driving around normally and not towing my caravan evey thing seems fine gears change smoothly up and down as they should. When giving the car a bit of wellie it gets into 3rd and hits what I...

Just been going through my BECM setting on my 1998 2.5 DSE and am confused with what some of them mean/do and should be disabled or not. In the light, window menu Window cancel = Disabled Service light = Disabled In the Options menu Cat AMP/heater = fitted Engine = late EDC Wiper speed =...

Moving on from the oil leaks I have a steering wheel shake around 60MPH so took the car to my local garage who have balanced all road wheels. Steering wheel shake still there. Took it back and they checked the steering and front suspension for faults and found none. They took the car for a...

Took my car in to my local garage to track down some oil leaks and was told the following, front crankshaft oil seal needs replacing, engine oil cooler pipes need replacing and the turbo needs replacing. To do the first 2 jobs on the list they asked for £400 :( so I told them where to go...

Brough a car with coils fitted and have now changed to air, when I park on a slope and stay in the car, turn the ignition off the car tries to auto level instantly, is this normal?

Having got my Nanocom working I have now found some fault codes, EDC - fuel flow valve out of range. HEVAC - (32) compressor clutch control circuit open (fault type current) Also have another on info screen - catalyst overheat, but can't find a fault code for it! Any ideas what I should be...