Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    300tdi 90 Lost Braking

    sooooooooo it turns out the F/N/S caliper has been leaking and today the resi is nearly empty. Anybody know where the cheapest place is to source calipers ? Thanks
  2. A

    300tdi 90 Lost Braking

    First thing tomorrow I will get checking. Unfortunately, I've parked on muddy gravel so no nice pool of brake fluid for me to find but hopefully I will see something.
  3. A

    300tdi 90 Lost Braking

    Well it appears my night time sight is not as good as I thought (or I was clouded by Landy Anger) Any Ideas ..............
  4. A

    300tdi 90 Lost Braking

    Thanks, it's a 1994 300tdi 90 van back.
  5. A

    300tdi 90 Lost Braking

    As a complete newbie when it comes to brake systems any help would be appreciated. My brakes seem to all of a sudden lost all power. Pedal hits the floor and nothing - It will just about bring me to a slow stop from 5mph. Any advice on where to start diagnosing tomorrow. I was in...
  6. A

    90 chequer plate Sills - Free to a good home

    I seem to be banned from posting in the for sale section so.......... Having installed my rocksliders yesterday, 2 chequer plate sills (cills?) going free to a good home. Collection only from near warwick.
  7. A

    90 Middle seat cushion base wanted

    Same here, as soon as my cubby box arrives. Middle seat available free if collected from midlands
  8. A

    Heater Fan Speed

    Thanks All, I will do some dismantling and see what rubbish has found its way in there.
  9. A

    Heater Fan Speed

    Thanks, So is it as simple as loosen cable, pull a bit more through then re-tighten so that the fan clicks in a little earlier ?
  10. A

    Heater Fan Speed

    I know this has probably been done to death and my searches have given me a rough idea of the problem, just after a bit more detailed advice. 300tdi, Fan speed selector (right of steering wheel) doesn’t really do much until the very bottom of its travel, then if you hold it down with some...
  11. A

    A-Bar Fitting (Near Disaster)

    It was an ebay jobbie, labelled up as realsteel4x4. It's either a rebadged rebel, or a very good copy.
  12. A

    A-Bar Fitting (Near Disaster)

    If the bumper had been attached properly in the first place it would have been 20 mins max. Damn previous owner !
  13. A

    A-Bar Fitting (Near Disaster)

    My first job of many was to fit an A-bar. 10 minute job you'd think ............. until discovering the chassis/bumper joint was missing the captive nut block and the bumper was only held on my loose bolts, great ! Bit of bodging with the welder and some nuts and it will all be sorted...
  14. A

    90 Reversing Light Switch

    Thanks for the advise all, turns out I do have 12v at the rear light, just a dodgy loose connection. Cheers
  15. A

    New member near warwick

    You want a picture of me !!!! Would you prefer clothed, nude or semi nude
  16. A

    90 Reversing Light Switch

    Thanks James, I will take another look tomorrow. Do you know if there is a bare terminal at the switch I could get a multimeter to? Thanks again
  17. A

    90 Reversing Light Switch

    Hi All, From searching, i'm aware this one has been done to death however a little help would be much appreciated 1993 300tdi. No 12v at the reversing light, so I have popped the centre seat out, lifted the lid and looked for the switch as has been advised in other threads here, however...
  18. A

    New member near warwick

    Hey all, I've been a long time lurker but have finally acquired my first 90 and am very please with it, much to the wife's disgust. As I seem to be learning, it needs a LOT of little jobs doing, hopefully no big jobs for a while ! So please bear with me whilst I ask a lot of questions and...
Back
Top