Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. hoopfish

    Freelander 2 (LR2) Hub Bearing/upright assembly removal

    A bit of advice please. Front offside hub. I have removed everything and undone the wishbone bolt but can't move the knuckle down far enough to remove it from the arm. Does the wish bone need to be removed fully from the car to allow it to drop?. Thanks
  2. hoopfish

    What have you done to your Freelander today

    Dropped it off at the local LR garage.
  3. hoopfish

    Freelander 1 Key fob range

    If you are too far from the car for the fob to work, put the end of the fob to the side of your temple/head then push the button, it should then work. You are welcome.
  4. hoopfish

    Freelander 2 (LR2) POO45-19

    Thanks for the reply. Off to the garage it is then. Will be putting it in to a LR independent though.
  5. hoopfish

    Freelander 2 (LR2) POO45-19

    Good morning. So the LR2 07 plate has started throwing up the above fault code. It started missing on acceleration, like a miss fire, but mainly around 1000rpm. Took it to the garage and was told the turbo actuator was shot, quoted £1500 for a new turbo and actuator, although they have never...
  6. hoopfish

    Hello and please advise ...

    You was doing so well until the last bit. 😬
  7. hoopfish

    Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!

    We had the same warning lights for the suspension, this may sound silly but check your brake lights are working, blown bulbs can mess with the electronics.
  8. hoopfish

    The LZIR Map

    Not yet, can't get an appointment!.
  9. hoopfish

    The LZIR Map

    Good afternoon bb. just to update you, I now have iid if anyone in my area needs it!.
  10. hoopfish

    Need Help Sourcing An Engine For A 2016 Discovery

    Bugger it, I was hoping to get some recommendations, need an engine for a 2007 Disco. 😎
  11. hoopfish

    Tdv6 broken crank did i get lucky

    The injectors have been tested!
  12. hoopfish

    Tdv6 broken crank did i get lucky

    Many thanks for this input, I will take a look at both the filter and the snorkel tomorrow. Failed oil pump was mentioned by the garage, problem I have is that the top end of the engine is in the boot of the motor!. I am not yet ready to give up on it until I know for sure what is wrong.
  13. hoopfish

    Tdv6 broken crank did i get lucky

    So my LR3 that has obtained a noisy knocking noise, but still drives and looses the noise around 40 mph, probably has not got a broken crank?.
  14. hoopfish

    LED upgrade.

    Looks like I will be sticking with what I have got. I will however need to change the bulb holders as one of them has got very hot at some point of its life.
  15. hoopfish

    LED upgrade.

    Looking for recommendations for an LED main beam upgrade kit for my 2007 Freelander. I have had a look and it would appear there are a number of kits from £30 - £130 . Has anyone done this with success and can point me in the right direction please.
  16. hoopfish

    Disco 3 (LR3) What's with the knocking??

    Perfect thank you.
  17. hoopfish

    Disco 3 (LR3) What's with the knocking??

    Good morning lz gang. So after the pain of the Disco throwing in the towel, which is going on to ebay and face ache if anyone is interested!. I have a question regarding the FreeLander. It has blown 2 main beam bulbs since owning it, the connector to the bulb looks like, at some point, it has...
  18. hoopfish

    Tdv6 broken crank did i get lucky

    A question if I may. When the crank throws its hand in would the engine still run and drive, albeit with a lot of added noise?.
  19. hoopfish

    Disco 3 (LR3) What's with the knocking??

    SO! . The Disco is no more, it is a deceased Disco. Injectors came back as fine, they did a pressure test and various other things to no avail. They are now thinking possible oil pump which requires engine out body off and another holiday paid for by me for the mechanic and his family. Obviously...
Back
Top