Search results

Hi Richard, I had a disco 2 at that lately - not good - I had to replace the ecu - a tiny resitor in the ecu got fried. - Have a look at my posts and you'll see a photo of the resistor and it's location in the ecu. I also had to replace the wastegate modulator as it was goosed too, but...

In Ire, we get a form from the dealer and they write the duration on it. I'm gonna check with the consumer rights people and see but I reckon I'm goosed.

Hi Fanatic, I too reckon it's a resistor - I just need the colour scheme and direction it was facing in so I can try and mount a new one to see if I can save it. There is no point in trying to test any other bit of it unless I get that bit fixed.

I think I have found my problem, the question now is what was it............has anybody got a photo of the inside of a NNN500250 ECU?

Thanks. I'll let you know how I get on.

Thanks Sierrafery. I have an option on one but it is from a 2000 d2. Mine is a 2004. I seen a post you put here showing compatable ecu's, but neither mine nor the replacement one are listed. I have an NNN500250, On the sticker with the barcode. While another sticker on the top says NNW500330...

Hi Sierafery, Yours does the same as in, #'CM ROM Checksum Error'? It seems to be the one that was shipped with the disco but I am not too sure. If I was to get an ECM, will I be able to program it using my Hawkeye? Regards, Joe.

Hi Landyzoners, I need a small bit of help from Hawkeye owners. I have a 2004 D2 Td5. Manual 7seater. When I plug in my Hawkeye and go in to the td5 engine diagnostics, I then run the circuit tests, injectors all fire ok, however when I try to run the CM test I get an error. Is this just me...

Hi Sierrafery, Thank for the suggestion by the way, I think I had seen a post in here from you previously about that and had cleaned and greased my earth connections on the basis of reading that. Joe.

Hi All Landyzoners, Thank you for the replys. Deciding to take the initative yesterday I decided to put a vicegrips on the return pipe to the fuel filter in the engine bay to rule out the FPR. She started fine but cut out again on revving. I was of the opnion the only luck I was having...

Thanks for the replys. I should have mentioned the red ecu plug is as clean as the day it went in. I'll see if I can test the ecu plug to the injector harness today.

Hi Landyzoners, I have a 2004 Disco TD5. A few weeks ago she refused to start. Turning over fine but no fire. I have replaced the injector seals and washers, the fuel pump, filter, one way valve and the air bleed valve. All genuine LR parts. We also blew out the fuel lines and checked the...

Hi All, Just a quick question to the Hawkeye users, my D2 is not starting.... I obtained a Hawkeye and had a few codes on her :( They are ranging from the following: 3129 Road speed missing 3183 Injector 1 Peak Charge Logged 3184 3185 3186 3187 Injector 5 Peak Charge Logged Ignoring the first...

I'm going to try mason brook in Loughrea in the morning as they have listed as breaking one of not I'll eBay one. Yeah the local dealers can be saucy. The other car is a Honda so same dealer around here. They'd scare you with the price of stuff. Thanks for the offer. I'm originally a Tullamore...

Hi thought-it-was-mine, I hadn't thought of that. Will it make a difference I wonder? There was me thinking one less thing to break down. It was done by a reputable garage tho using the proper kit so I hope not. We shall see. The policy is up in October. My wife can't tell them then and we'll...

Hi thebiglad and dooroy, I should of said that the dealer I purchased the disco from isn't a Landy dealer, I can see that the fuel filter is new and the oil seems very clean on the dipstick. That also actually converted it to springs on the rear and put in a clutch that they're giving me a...

Just done the very same thing myself this evening. I Presume it gets brittle over time. Not a good time to do it with the opening ceromony to tonight. I presume it'll take it a bit longer to get it shipped from the UK in the coming week. I've ordered it anyway.

Thanks all for the help. I have double checked and it was fully serviced by my dealer, they are reputable enough. The didnt know about the second oil filter but i have ordered that and will put in in over the coming days. After that I'll head for the ECU connections and and have a look at the...

Hi sierrafery, Thanks for the response, possibly a silly few questions to follow. It doesn't say TD5 on it any where even in the manual. Is it defiantly a rover engine and more importantly is it a reliable/good engine? Many thanks. Joe.

Hi all, I am a new Disco 2 owner. She drives mint, I only got it today and I am very impressed with how smooth it is. I do have a few questions thou if any one can help. I am trying to identify what engine I have, I know it is a 2.5 diesel, it is a 2004. I am wondering this as I have a few...