Search results

Thanks Nodge, will have a look!

Is there any footage on here of someone fitting the R5 Stat mod to a Freelander 1 please. Have seen one for a Rover 75 but can't find anything for the Fl1

Morning all, just wondered if there us a fix for a floppy door mirror on a non powered door mirror. If I have to pull in close in the Devon lanes to let something pass and there is something larger than a piece of bracken in the hedgerow, it pushes the mirror in towards the car. Is there any way...

Cleaned my milky Headlights with glass cleaner and baking soda. Came up really clear!! Horrible yellow deposit came off them!

Have had Brake failure on my '54 Td4. Just parking up on a clients driveway and the hand brake wasn't holding the Freelander very well and as I put my foot on the brake to hold her as I put her in gear, the brake pedal travelled down to the floor. I managed to get her up the drive to park her...

Kingsbridge

Hello all, Am back after a few years absence. The 200tdi I had bit the dust and went on to become a donor vehicle. I now own a Freelander 1 td4 Facelift '54 plate and am picking her up next weekend. 200000 on the clock but huge amounts of service history and the a new VCU. Am really looking...

Thanks for the info. Sounds good to me.

I have been told recently that if I waxoyl the underside of my disco 200tdi, I wouldn't be able to weld anywhere under there afterwards. Is that right or have I been misinformed?

Have found info in need in the search engine.:search:

Have found the answer now in the search engine.

hi, probably posting this in the wrong place here but hoping someone might have the answer. I was about to change the spring in the drivers door latch when getting in to her in the fuel station the handle ripped and i was unable to open the door at all from inside or outside. I need to get her...

could do with drivers door handle and latch if its available and rear bumper if its ok.

hi everyone, the spring in my drivers door has gone and now I can't open the drivers door at all. it was one of those jobs i was getting round to doing and went to get in her at the fuel station and the door handle tore as i was trying to open it and then couldn't open it at all not from the...

Thanks they are chrome covered so 28mm it is then . Enjoy your week and thank you for the replies .:)

Hi everyone , could anybody tell me please what size wheel nuts a y reg disco td5 has . My dad wants to buy an impact wrench for his compressor and has seen one in the local rag at a good price and wonders if it has the right size socket to fit his disco's wheel nuts . We've look all over the...

Welcome back , i have a 200tdi on an L plate with 194000 on the clock shes off the road at the mo . i took her off at the end of jan because the mot was up and i knew of a couple of things that needed to be done for her to pass. now the weather is warmer its time to fix that spring in the door...

Welcome from south devon . Enjoy the forum .

Hi fellow Devonshire dweller , welcome to the forum . What part of this fair shire are you from ?:)

Hi Discodiva welcome to the forum from one 200 owner to another . That's one sexy Landy . Keep her going ! I was in London this Weekend to see Pink at the 0O2 fantastic show and then saw Chelsea play at home yesterday. Will look forward to following your progress. Good luck , just watch out for...