Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. Universally_Challenged

    Do you know this vehicle

    Sorry it's not quite the desired nut and bolt talk, but this vehicle has been on the rob locally and I was wondering if anybody knows of it or where it usually haunts. Not ideal pictures, but it's unique enough in the dark to be identifiable. Much thanks UC
  2. Universally_Challenged

    sorry guys, help needed tonight :(

    everything works, except the automatic light... it seems the neg is switched via the alarm ecu, and thats not changing the state of the neg. :( i think its toast... will update in a few days
  3. Universally_Challenged

    sorry guys, help needed tonight :(

    UPDATE. Not a fuse.. there is a permanent 12v, it seems the short has affected the negative switching. any ideas? bloody alarm ecu fried??
  4. Universally_Challenged

    sorry guys, help needed tonight :(

    2012 defender puma. Internal courtesy light. I've blown the fuse in the bosses defender, the internal lights. Somebody has bodged some ****y LED lights in and I was tasked with removing them. I pulled the front internal light out and POP, somebody has gone to town on twist joins. Anyway...
  5. Universally_Challenged

    the girlfriend has extra bits in her swivel..

    i can't see it doing anything bar spreading the load, as if it was twice as thick...
  6. Universally_Challenged

    the girlfriend has extra bits in her swivel..

    have a look at this parts diagram I have attached. When stripping the girlfriends axle out there were two Retaining Plates (number 13) fitted..... per side... just doubled up along with a paper gasket. Is there any reason why there may have been two? maybe an old garage trick to apply...
  7. Universally_Challenged

    Metal calliper to flexi brake pipe PN

    DISREGARD literally hit post and then saw a listing for it.
  8. Universally_Challenged

    Metal calliper to flexi brake pipe PN

    Just doing an order online and cant find a PN for the defender calliper to flexi metal brake pipe... I can find the ANR2947 near side. ANR2946 is just listed as brake pipe and not handed.. is this the O/S one?
  9. Universally_Challenged

    thoughts on paper gaskets and the use of sealer..

    Buy gasket paper? I've always used an old wheatabix box for my 125cc bikes when I was growing up. Maybe my question should have been... if using sealant and a gasket... do you just use it one side? because that would give you a dry side unsealed with sealant. but if you use it both sides...
  10. Universally_Challenged

    thoughts on paper gaskets and the use of sealer..

    JOB: full axle refurbishment, front and rear. So are paper gaskets ok by themselves or would you recommend a bit of sealant too? The paper gaskets seem a lot thinner than the ones I am pulling out. Some people say paper and sealant, some say just paper, some say just sealant. I don't...
  11. Universally_Challenged

    90 front axel

    Just an update.. Everything is off now and stripped right back. Shocks despite their appearance feel like new. Looks like its wire brush time
  12. Universally_Challenged

    90 front axel

    Yeah its a keeper at the moment so I don't want to damage it too much, its rusty as hell too but its not scheduled for a change yet. Good call, I have one back at my place somewhere .. I'll bring that over and huge it a try. I'd love to apply some heat but I doubt the bushes would like that...
  13. Universally_Challenged

    90 front axel

    Its the UN tightening of a 25 year old but is the issue.. Do I just go for it until it gives? Or split the nut off?
  14. Universally_Challenged

    90 front axel

    Its just started tipping it down so I've packed it in for the day, but the last thing I was doing was staring at the 19mm but that attaches the front suspension to the Axle.... It turns, along with the shock, go I gently gripped the shock with a big wrench and tried again, and the whole lot...
  15. Universally_Challenged

    Pop Quiz... Photo edition...

    Cheers Steve. I don't think this one is MOD.. Did the late 80's 90 have many optional extras?
  16. Universally_Challenged

    Pop Quiz... Photo edition...

    Just curious... She does work. ish. It would just be nice to know what they were there for
  17. Universally_Challenged

    Pop Quiz... Photo edition...

    But isn't that at the rear of the block on the head? Because that's all ready connected....
  18. Universally_Challenged

    Pop Quiz... Photo edition...

    Could you please identify the following unconnected connections... Green and blue wire Brown,green/yellow,brown 3 way Yellow/black,black White/purple single White/red single Cheers
  19. Universally_Challenged

    Freelander FBH webasto

    If the connector is that bad clamp your meter onto an earth and pin the cable...
Back
Top