Search results

Had the calipers apart looking at changing the pins and how hard a task it is to replace them

Hi looking for some help on how hard it is to change front calliper pins on a Freelander 1 it has the pin with the rubber sleeve on one pin thanks in advance:)

Thanks to the senior members also for reading glad you have the time

Thank you for the replay as a lot of the answers when you search are very ambiguous as to if you have to mod or not thank you for the reply

Just WANTING TO CONFIRM I CAN FIT 235 55 17R WITH NO MODS TO CAR BEFORE BUYING THANKS IN ADVANCE:)

Just to confirm 235 55 17r can they be fitted with NO mods required thanks in advance:)

Bit late but yes I have a rover ron kit and I fixed the problem on the rail by fitting a new washer in the end stopped the leak pressure is higher with kit and show up any weakness in system

Hi just to confirm can I fit 235 55 17 on my td4 running 225 at the minute:)

The cable comes in throw the inner wing on a rubber grommet and goes into a bigger harness its a gray and green wire would make it Essy to take headlight out but you can manage with out bit fiddly but it is possible:)

Good to see people making good use of a great pice of kit if its of any help the wiring is just behind the batttery so you dont have to strip the splash wing off with thows horrible phillips screws :D

Hi yes it needs +12 volt ive fitted a relay withe timer board and remote all for a grand total of £36.40 :clap2:

Back again just to let people know the wirinng for pin 3gray and green wire which start the fbh comes out the inner wing near the battery this will help in not having to strip the innner splash wing off becouse of all thase horrible phillips screws as i did hope this help if anyone is fitting a...

Thanks for the lnfo:)

Hi looking for help have worked out cab heater wiring to get that running I know i have to have a +12 volt to pin 3 on socket x of the fbh what i need to know is there already a wire to pin 3 and if so were dose it go or do i have to take the inner splash wing off and fit a wire and pin in the...

Hi looking for bit of help worked out how to fire cab fan dose the fbh alredy have a wire too pin 3 of the heater or do you have to fit one thanks

Hi looking to fit a timer to my fbh which will put the heater on for aprox 20mins Do you have to remove the nearside inner wing to get to the wireing I belive you have to put a postive feed to pin3 of the unit to fire it up I may use a remote unit to trigger the timer or mybe a clock Has anyone...

After looking every were for advice even the BMW site no one seems to have had this problem so i took it apart and fitted a cooper washer and looks to have solved the problem the nut is very tight had to use a beak bar to realise it just for reference it has bullet shape under the nut which...

Hi as anyone had one of these leaking and can they be resealed