Search results

What is the purpose of the second arm on the pump that is moved with the actual throttle arm? Mine doesn't seem to spring back under the spring load after the throttle lever is pulled

after buying my first P38 4.6 V8 as a prodject and spending nearly £1000 on her only to find the block was cracked i was feeling extreme low or in my words PEED OFF!!!! i fell in love with her straight away and never even got chance to drive her :( so to cheer myself up i went out and...

After spending nearly £1000 on fixing my P38 and rebuilding the engine, I later found out that the block was cracked :mad: before i realised my block was cracked my fuel pump gave up the ghost, so i bought a brand new one which is still in the box and sealed in the plastic bag and was never...

Thanks for that, I'll bear that in mind before I fit it, but in all fairness the power transistor in the ecu do draw a lot of current so get very hot hence why the latter ecus had the heat sink built into... I've just got to wait for it to arrive now to see if the later ecus do work on the...

could be a number of things, if youve replaced the valley gasket you would have had to unplug alot of main componentsas stated before make sure the the injector plugs are connected the right way around, there is also an idle air control valve which may have not been plugged back in, and also a...

hello boys and girls of landy zone, its been awhile well lets try and keep this short and to the point i bought a P38A 1997 4.6 V8 HSE as a prodject and ive descovered that the transfer box doesnt change from high to low, so checked the micro switch on the gear stick and all was good...

cheers bud, just the test i wanted to do, just worried the CEL was going to stay on have you done this test yourself??? on an alfa forum im joined with, my motto was "if in doubt MAF it out" they are the most unreliable sensor on any car, and they can cost a couple of hundred quid...

hello boys and girls a friends TD5 T reg D2 is running realy low on power, and was talking about a remap to get some power back. But after i took it for a run i told him it doesnt need a remap, it needs something sorting on the engine as it shouldnt be that gutless. Ive drove 2 300 TDI's and...

ive got an earth on the back of my 1.8K-seires that doesnt go anywhere and looks like it might be cut its the later euro 3 engine with coil packs and not the dizzy on a 2003 plate ive linked 4 pictures starting at looking at the engine and then they slowly zoom in so you know where im...

you could have a point on the electrics i know how bad a crap earth can be to an ecu engine. I did notice an earth point at the back of the engine that looked as it was cut but couldnt find where they went. If you could look at yours and see where they go that would be great. There are 2 wires...

sorry should have memtioned that my k-series is the euro 3 model which doesnt have the FPR valve and as youve just found out its just a damper. Ive put a second hand fuel rail on which came with the damper attached, and it didnt make it better or worse. So i dought its that whats causing the...

Im always glad for any info and hopefuly i dont come across ungreatful or anything like that but thought id let you know info on the Freelander version of the 1.8 K-series..... REGARDS ADAM

nope, was change the day i had it, plus ive ran it with no air box on and no difference

hello landyzone ok for the people who have decided to have a read and hopefuly help with my problem, i will say straight away this is not the normal headgasket misfire from te crappy K-seires that usualy occures and seems alot more complicated, so ill do my best to explain the problem i...