Search results

Hi Guys has anyone got ideas about replacement rollers for window regulators on a disco ! . I have now had two rollers disintegrate one on the front off side & now a roller on the rear door near side . I put a complete new regulator in the drivers doo but the rear ones seam thin on the ground...

No , James the piece of metal that I refer to is, or was on top of the gear shift housing running east west behind the gear stick , a flimsy bit of die casting about 15mm or 3/4" high 2 mm or 1/8" thick and approx 35mm or 1, 1/2 " long. It did not seem to serve any purpose except to maybe limit...

I had a similar problem on my 98 series 1 disco manual ,I stopped at traffic lights and suddenly could not select 2nd 4th & reverse . It was a simple to solve problem ! I took the gaiter of the gear shift and found that a piece of casting that is above and behind the gear lever had broken off...

Thanks Elmer D & Twice Nightly your info was a great help / I tool the ST wheel off with difficulty & it all became clear . all fixed now . Thanks Chris l

I have a 1998 series 1 disco and the trafficators do not cancel . Anyone got ideas , How do I fix this problem ?

Lerk I can't thank you enough for the P gasket post !!! Well done . Cheers Chris L

Thanks Guys I found that the tacho flicker was caused by the feed wire on the back of the alternator !! Wasn't loose but the wire was silver soldered to a terminal connector & the joint wasn't good , a bit like a dry soldered joint with ordinary solder any way its fixed now thanks for all your...

Thanks johnboy & Daz I wondered where the tacho feed came from & I will check the pulley , I have to replace the dreaded P gasket this weekend ? be a good time to check the alternator wiring .Cheers ChrisL

Anyone got any ideas as to why my temp gauge suddenly quit , I have fitted a new sender , also have a tacho that flickers around between 1000 & 2000 revs . Any one come across this before ??? All this on a 98 Disco 300 tdi manual . Cheers Chris L

Hi From Melbourne Australia Landy Zone people , I am new to this forum . Got a 98 Disco 300tdi which I have now had for a year without troubles , then started to lose water & thought it was a head gasket , after pulling the head and valve job and refit I found that it wasn't a head problem...

Dont know if this will be of any help to you . I had a persistent leak that i thought was head gasket & it turned out to be the P gasket on my 300 tdi . I found a product called RISLONE it is a Bars product & made in the USA They say it is a permanent fix for block or head gasket leaks & you...

Hi Every body I am new at this & this is my first post. From Australia . I have a 1998 Disco 300 tdi manual series 1 . I have had it for about a year and I think when I first got it that the electric motor fans used to run on a hot day even after I had turned the motor off . They don't do it...