Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. C

    Disco 2 SLS dropping to bump stops whilst driving

    Ok, 150+ trouble-free miles since I removed the device in the attached image. Fingers crossed it is fixed, but time and more miles will tell for sure...
  2. C

    Disco 2 SLS dropping to bump stops whilst driving

    That's some great advice, especially setting to coils - many thanks! The device in the image appears to be for lowering the rear suspension for towing. I cannot find the exact one on the WWW, but there was something similar shown on one on the various LR forums. I have removed it now and...
  3. C

    Disco 2 SLS dropping to bump stops whilst driving

    Just found this taped up in the loom below the SLABS. . I am going to fully remove it, as it is the next logical step I can think of before going down the component swap out route..
  4. C

    Disco 2 SLS dropping to bump stops whilst driving

    Gents, I have a strange SLS issue that manifested itself a few days back with my 04 D2 TD5 (94k miles). Whilst driving the SLS amber light will come on and it will drop onto the bump stops. It will also trigger the bong but not always like today when it did it coming down the motorway at 60mph...
  5. C

    Breaking 300 disco + lots of other stuff

    I am after the following: 1. O/S/R inertia seatbelt (in gray) 2. O/S/R boot trim panel complete with plastic trim and seat release lever 3. C pillar trim (interior) If you have all of the above in good condition then can you let me know a price and rough location? Thanks in advance! :D
  6. C

    Side steps

    No worries, just sitting in the garage gathering dust in the meantime......
  7. C

    Side steps

    I have just taken some good quality ones off mine. They are in very good nick and look like the ones in this listing although I think they were originally Britpart sourced for similar money... Discovery 1 Side Step Running Board Aluminium Tread BA 092 (BA092) | eBay I can try and get an...
  8. C

    Top welder required Wolverhampton area

    How about further afield - it still drives!?
  9. C

    Top welder required Wolverhampton area

    I require the help of a good welder/fabricator to patch up my 300TDI in the normal places - anybody on here fit the bill or any recommendations? Thanks in advance!
  10. C

    Rotary coupler airbag circuit continuity question!

    That was not the case with mine, see above!
  11. C

    Rotary coupler airbag circuit continuity question!

    I replaced mine with a second hand eBay special just the other day. The SRS light was intermittently coming on when turning left so I took a guess at the rotary coupler! As stated, the connectors have 'shorting bars' as a safety measure when removing and installing SRS components. I...
Back
Top