Search results

update - i had to glue one of canister ports which seems to have helped. However, i installed the piston repair ring and it made a worse noise and would pump at all, i then fitted the old ring and its back to noisy but at least pumps. so im not much forward on this and am now looking at a...

Compressor is noisy ( but that may have been the canister ), will check once repair has set. If still noisy - will probably do the piston ring repair...

Yes thats it - thanks. i only need the canister as one of the male pipes has snapped off. may remove and try a glue job for now. that must be why its slowly sinking !

Hi, my compressor is starting to moan and considering the piston ring repair soon. Noticed car is now dropping BOTH sides at rear. have changed bags before when one side has dropped but this seems more like a leak to affect both sides. Noticed a pipe broken off a black plastic "can" just to...

Both sides need replacing. OS done and squeak gone when turn right- still there when turn left .

yeah im now thinking one or both ball joints on swivel !, done hubs before but this looks more in depth and dont have any presses for replacement.

Hi, My d2 has a loud squeak from nearside front wheel area when turn wheel left and right. No noise when jacked up with no weight on it. Originally thought tracking rod end but changed that and still there !, now thinking in the hub area ? any suggestions welcome....

Definitely top up with engine running and you may find its just coming out from the overflow pipe due to bad fitting or damaged filler cap.

hi, checked and rear lights were off too - my issue is the switch on light stalk. slight fiddle with it and all come on again. will try a repair or replace.

My dash lights have just started staying off, not checked rear but not been flashed yet - fronts are fine. i think mine started after i towed. May be coincidence and seems to come back on after a few bumps/brakes !

Received Nano Evo today and immediately reset the AS fault, now the fun starts. Lots to read. Thanks to BBS for fast order process.

hi all, about to get one of these two this week but still hesitant. Looks like Nano may do air suspension height settings and keys without barcodes but probably won’t need that. Anything else I should be aware of, dealing with Cyprus , reliability, support, ease of use etc...

any one have advice ?.

Looks like just the clutch kit is around £60 - £100 and £300 ish including the flywheel. Do you know what a garage would charge to fit. I have done airbags & suspension parts, but dont have the knowledge or equipment to do a clutch. thanks,

Thanks, i will keep an eye on it. As long as it dosnt slip in first pulling away i think i will be ok. a clutch replacment sounds costly..............

Hi, My D2 has got a heavy clutch pedal ( has since i have had it but dint know if its normal ) and slipped the other day when towing a horse trailer. It was a hill and i was in 2nd gear then been fine. In your experience, is this an issue if i always pull away in the correct gear ?. Also ...

Hi, I live in ipswich and just changed one of mine becaus eof exactly same issue. It cost around £80 and Dunlop branded. The originals have a screw in connector on the top of the bag but the Dunlop ones have a push fit. You just cut the screw off and away you go.

is the odd slip ok when towing or does thi sneed changing ?

Hi, cant offer assisitance but mine did same thing today towing horse trailer. feels like i am in neutral and then been ok again. Does that mean new clutch needed ? teh pedal has always been stiff but only comparing to my saab so dont know if that means anything !

Hi, The inside of both my front tyres is worn. I have replaced the ARB bushes and wanted to know what else i should check prior to a tracking check & adjust at the garage. many thanks,