Search results

Hi If you find one no programming required assuming you replace like for like I changed both units and it worked straight away

Mine blew both amp and DAB unit You can get a loop cable for the fibre optic to block out the DAB See if that is the cause I paid around £150 for a used amp and £100 for used DAB If you think you have located the issue take the numbers of the unit and have a google you may be able to get a...

Hi I think it will be the amp is on the right hand side of the boot Remove the floor and the anchor points on that side Remove rear rubber and then you remove the cover support You should be able to unclog the right side plastic You will see the amp and the dAB unit bolted together Hope...

Thanks I have got a Icarsoft I will plug in. Does anyone have a map on where the units are located in the car?

Hi Folks, I need some help I have a 2012 Freelander 2 XS SD4 Auto, the radio has stopped working, It appears on the screen as blanked out, the phone connectivity has also stopped. You can select the Satnav but it just sits there initiating Along with this although the rear parking sensors work...

Hi, Is this still for sale?

Update on what I found yto be the fault "DogsBody" the member that is, raised my curiosity with his comment about the build. I removed the instriment cover to look for the build to find the cable that plugs in the front left side hanging out. Plugged in and the light is now out. Thanks...

Thanks Guys, Its a 1998 4.6 vougue, it has a new battery the guys said they had checked the wiring although I will check it my self I did not now that the bulb had a backup si I will check that as well, they did say that there was a fault on the steering wheel bag but cleared it and it did...

Hi, I have an SRS fault and had diags done whilst I was away working with the car. The guys at the garage I used said it was the ECU that was at fault, My chais is a WA402xxx thay siad I needed a particular ECU, I was wonder if any one has a part number for the ECU and its related Chassis...

that should say Denso

Hi Folks I fited a new Alternator Desso 120amp from island 4*4 and got the 13.97 volts when doing 2000rmp. So this is the same as my previous alternator. I did another amp test and after two mins it drops to between 27 - 30 ma. I have tried several other key fobs garage door remote...

Hi Folks, I checked mine is a GEMS 1998 car that has 120amp alternator, it is giving 13.9 volts. As this is 120 amp should I still see 14.2 volts as a min? Thanks

Thanks Folks, I have dropped my Multi meter and it is boken, But I am pretty sure from a test I did a while back that it is giving 13.6 volts, will buy new meter and let you know what I find

Hi Folks, I have a 4.6 P38 that drains the battery every couple of days,this is what I have done. New Battery Replaced the Unit in the rear for the alarm Tested the current draw for BCM:- Results where after a couple of mins the current draw dropped to .27ma Tested other car fobs etc with no...

Hi folks, Someone has fitted the incorrect Lambda sensor in the past and change the connector on th ewiring loom. I would like to put mine back to how it should be Its a P38 4.6 with a WA chassis number using AMR6244 Lambda sensors. I need to find the correct connector which is grey, the...

Ok, Thanks for the advice Grin

Hi Folks, My 4.6 P38 had Lambda faults on both banks. I ordered two new AMR6244 sensors fitted the one on the left banl as you look from the front of the rangie, but the right one does not fit the connector. the Rangie is a WA chassis number. Is this standard or do you think the...

Thanks

Hi Folks, I have a 4.6 p38 WA chassis number with bad lambda sensors ordered two new AMR6244 sensors looking at the range from the front the left one fits and the error is cleared, the right one does not fit the connector is different does anyone know why I have two diffderent sensor, as based...

Cheers for link very useful Thanks