Search results

Hm, how exactly do you apply the correct torque with box spanner? I do have a torque wrench and hubnut spanner but joining the two together to apply the correct torque? Shall I give heath robinson a call?

MOT failed on brake pipe corrosion. Main rear lines changed at garage, front part of line all so changed, bleed through a couple of times with air pressure kit, no bubbles left, brake pedal still a bit spongy, pedal drops very slowly when engines running, not at all when off. Do I have a master...

Hi peps, any suggestions on replacing a front near side brake pipe on 2007 110? Do I replace the entire length or cut it off past the corrosion and join a new piece? Not sure how best the access the pipe in the engine bay tho! Seems cutting it might be fun! Possibly a job for a dremmel with...

Any of you lovely people recommend a garage/mechanic who can take a look at my clutch, classic pedal drop this morning! In the St Austell area as working there at the mo. Thanks in advance. G.

You’ve all seen those door keep hooks, few work on Landys as they are off set by 20 or 30mm. Bought one as a test to modify it. drilled and tapped a couple of bolts in with a rubber furniture foot added. Now I can remove my Swiss cheese/rusty side runner step.

Just wondering if anyone has modified the front interior light to allow a dash cam to be powered from it?

Any recommendations for an independent LR mechanic in or near the MK43 0AT area? That’s Bedford/Milton Keynes area. Cheers.

forgive my ignorance but the unit closest to the PS fluid bottle is clicking away just as the engine dies. What fault should I be checking?

To this? Not that I know what it is. BTW TD5 2004 110.

Any of you lovely landy folk know if an Icarsoft EU Pro is good for a 2004 TD5 110 and an 2016 Audi A4? 110 playing up, maybe ECU, parking brake release on the A4! Was hoping to buy a multi car reader to save the cost of 2 separate units. Cheers for any advice. G.

Think I have a faulty ecu. Engine starts on turn over for a few seconds then dies, relay under drivers seat clicks off. What basic checks can I do to confirm it is the ecu. No warnings on the dash. cheers for any pointers. G.

TD5 with the dreaded clicking relay under the drivers seat! What do you check first, relay, fuel pump or ECU?

So the beast has been stood down for the past year, SORN’d, C19 and all that. Started regularly and moved about abit on the estate (garden)! Now getting her back on the road. For the MOT, apart from a full fluid and filter change, new fuel, brake and suspension check, is there any other...

Are the army surplus dry charge batteries worth a punt? 90AH, 950 CCA. From Witham auctions. Just wondering if anyone has experience of them? Cheers G.

Sorry guys, don’t know the correct name/part number of the seal in the centre of the image, td5, 2004, how loose should this be? I can rotate it with my fingers! Should it be replaced?

No not the paper storage or data types. Metal ones. I’ve been doing a bit work lately with Aluminium, was wondering how pro’s in the metal industry keep them clean. Wire brushing keeps the courser ones clean but what about the fine ones and needle files? Any tips appreciated.

I’m not a welder, but it’s a skill I’d like to have. Small checker plate door with a fold on each edge resulting in a metre butt at each corner about 25mm long, see picture. Plan to weld the corners with my small Clarke 100amp unit. Will practice lots before on scrap pieces. Should I approach it...

Anyone got one?

Just topping up but don’t actually know the quantity required to add when dipstick is on low indicator to bring it back the correct amount. Yes warm engine on a level drive. Cheers for any advice.

Any of you lovely people made your own fridge/freezer for your landy? Fitting out the back with demountable units, thinking to make one a fridge/freezer, do I go purpose made kit or break an existing unit for parts? Unit will fit behind the front seats of the 110. I'd like to make the top of...