Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. A

    Steering servo- oil leaking

    I have a disco TDI 300 96 model which suddenly has developed a serious leak in the servo for the steering. It looks like it is coming from the oil pump itself. The leakages is emptying the system over night. To exchange the pump will set me back USD 5000 they say in the garage- The pump in UK...
  2. A

    Disco Immobiliser question

    Thanks ever so much. As soon as the thermometer is crawling up to 0 (from 16 below!) I will give it a try:)
  3. A

    Disco Immobiliser question

    My dear friend, after spending time kneeling inn the snow I managed to get out the starter relay. Grounding it - It does not work! by the way I am not sure it is the right relay because the colour coding on the wires are different. However it wa the only relay that operated when I turned the...
  4. A

    300 Tdi Alarm Circuit Diagram Required Please

    Thank you for all assistance. I have not yet been able to try things out since the outside temperature is still hovering around 7-10 minus degrees, and we have 10-15 com snow on the ground. Will keep you informed
  5. A

    300 Tdi Alarm Circuit Diagram Required Please

    But I am not sure that it is a good idea to put in on the Inet Do you have a private account?
  6. A

    300 Tdi Alarm Circuit Diagram Required Please

    If you are interested I can scan and send you the lot. There are 25 pages
  7. A

    300 Tdi Alarm Circuit Diagram Required Please

    The Technical Information sheet does not say much. The replacement antenna is AMR2034A-96 MY Antenna, Alarm System Instruction for replacement: Remove yellow wire and terminal fromC225, cavity#26 The antenna to be place between the glass and the dashboard and reconnected to C225 The bare ends of...
  8. A

    300 Tdi Alarm Circuit Diagram Required Please

    Thanks for a quick response. Yes, I agree it looks like the Rf receiver in the car is not receiving the fob signal. I have got a replacement instruction for the antenna on the alarm module. It seems to be a rather simple thing so I will try that. But still the anxiety being afraid of being...
  9. A

    300 Tdi Alarm Circuit Diagram Required Please

    Unfortunately I am in Norway! I know electronics and electrotechnics (certified) The symptoms are that if the central locking system is working then everything is OK. But if the remote fails to open the door then I cannot start the engine (the blocking is working) This fault is intermittent. To...
  10. A

    300 Tdi Alarm Circuit Diagram Required Please

    Hi, I have problems with my Disco and have had the car at landrover for three months and they cannot help me. I would like to ask you the question directly.My Email is desavigny at gmail.com I would appreciate if you ahve time to respond.
  11. A

    300 TDI Immobiliser

    Hi Sarah, Oh yes, it is a known problem without a solution looks like. Landrover have send out a replace the antenna instruction to increase the range, but I wonder if that will help your problem. My remote battery does never last long. For other cars I replace perhaps after 3 years but with...
  12. A

    On the verge of tears

    Thanks for the hints for possible solutions. What I think is that nothing can be wrong with the spider since if the central locking is working then everything is OK. If the central locking is not working then I cannot start the engine. So unless the spider can influence the central locking...
  13. A

    On the verge of tears

    Thanks for a quick and long answer. First there is a EKA code: it stops the alarm but does not cut out the immobilizer. The car has an ECM and the fuel pump is stopped and the starter solenoid is "disconnected ". I will try to phone the gentleman whose telephonenumber you so kindly provided...
  14. A

    On the verge of tears

    Thanks - but I do really hope they have checked for theses things. And as they have had the things out and put in new ones the grounding should be OK
  15. A

    On the verge of tears

    Must have been the tears that blinded me resulting in a bad entry, but here is what I wanted to say: I do have a challenge to you all. The Landrover workshop guys have not been able to solve the problem: So now it is up to you, please. I have a 1996 Disco I The handsett (fob) usually works...
  16. A

    On the verge of tears

    double entry, Sorry!
  17. A

    Hi guys

    Thanks for the welcome. Yes, I know. But the problems are also on the mountains or in the :rolleyes: plains of India
  18. A

    Disco Immobiliser question

    Well, the instruction is in the Workshop manual for Disco 96 with two knobs controller.
  19. A

    Disco Immobiliser question

    See above for frequencies. Yours are 315.00 MHz if bought outside Europe
  20. A

    Disco Immobiliser question

    In fact is possible to initiate the handset without any "gadgets" using the procedure in the WS handbook
Back
Top