Search results

Hi guys, does somebody sell a new wiring loom kit for the 2A which has the wires labeled for easier installation? Thanks!

Thanks, yes I did order new cylinders. Recons are not available here so they are not an option. Ordered genuine slave and pattern master - hope they work ok. Do you have SII master with SIII slave like I do? Do you know if stock SIII clutch hose will work with this combo without modifications?

With my clutch sure the main cylinder is at fault but I suspect the clutch assembly is in need of renewing too. I think it knocked sometimes and the release bearing was noisy for sure. Then the clutch itself stuck to the flywheel and finally the master cyl stuck also. So, I feel that the clutch...

Yes, that link pretty much sums up my experience too ;) Actually I think taking out the box is not so bad job. Quite straightforward job with mostly bolts to undo. Then a friend to help me lift it out. The box itself its the thing that worries me a bit. I have done engines before but not...

Yes it seems like SIII box according to its serial # too. And I've been double clutching all the time with it. Don't even know if the syncros work :rolleyes: By the way, I have a LHD car so the master cylinder is under the front wing and cannot be reached properly without removing the wing :( I...

If you are sure you managed to attach the cable properly to the speedo then yes.

True, if serious off roading is expected weatherpack -connectors are nice and placement, weather and vibration proofing of components must be considered carefully. Part of the hobby. Eh...britcars are not exactly known for their good electronics or even basic electrics so for some reason I am...

LOL! sorry for tipping you over ;) Yes I am sure there has always been speed traps in UK but I just never saw one. Here in my country we have automatic traps distributed all over + the cops hiding in the bushes. Not nice at all. The speedo is actually fine in a slow car like Landy and you can...

Because it sounded a bit difficult to him, I thought the bike speedo would be nice and easy solution. And if your speedo is anything like mine its not accurate at all even when it looks like its working. So IMO one accurate £5 speed indicator per car is not too much to ask. Well, I live in a...

Assuming it is the speedo thats broken. Well, there is not many parts involved so it should be quite easy to find whats wrong.

If it is you could always go to a bicycle store and buy one of them cheap digital bike speedos and install that to your Landy. Cheap and more accurate than the original. Then you have time to figure it out while still having a operating backup. ;)

LOL! I think I have met few of those during the years ;) And thanks again Slob, I got a confirmation and my box is indeed out of a SIII like you pointed out. Hope my message to parts vendor was in time so they can replace the slave with a correct one.

Thanks! You know more about this stuff than I so you are most likely right. I looked at the Ser III manual but my luck - no picture of the complete box or even the location of the slave cyl. But it seems that the cyl is pointing forward like mine. The cyl in the manual is a bit different...

Ah goddamit, that I was afraid of when I saw the cyl where it is but didn't dare to say it outloud!! Are you positive? Hope I can still hold my order so I can get the right parts! Here is another view.

Yes, I guess they are. Well, I ordered new cylinders and will change them as soon as they arrive. The clutch does not work at all now so I hope that sorts it out. I ripped the floors and center tunnel bits out to find the slave cylinder. The box looks exactly like the one in my green book but...

I think adding supports to it before dipping would not be difficult. There is probably bolt holes that can be used to attach the supports without need for welding. Other possibility is powder coating the whole thing. The finish is rock hard and if done well will last forever.

Hi and thanks. No, there is no visible leaks at all and the reservoir level has not dropped either That is what makes it a bit difficult to figure out - no clear clues. However, as the pedal was stuck it does point a bit to the main cyl. But yes, I think its better to change them both too. The...

Have you tried replacing oil with grease? Might help with your leak. Cut and glue doesn't sound good but haven't tried it. Will oil dissolve the glue?

Hi, My clutch broke by itself while my Landy was standing unused during last winter. First it was locked solid and i could not move the car (clutch plate rusted to flywheel?). I was adviced to pull the Landy with another car to loosen the clutch. The clutch disengaged and i managed to push the...