Search results

was thinking free play but I've put a spacer between bellhousing and slave to no avail so now thinking some sort of hydraulic blockage on the return. going to try cheap fixes first, like a flush and rebleed, then new pipe, slave and master. Thanks all.

Hi All. I'm still here just don't post so often. I have a P38 with a 300Tdi in it. The clutch slave is 300Tdi the master is P38. The clutch slips in 4th if I try and accelerate from 30mph. It also lets go in 3rd occasionally. And then.......... it doesn't. No matter what I do I can't make it...

Hey it's an old piece of Landrover electronics. If it's broke it's broke. I have a work around so I will look into a new fob. Thanks for the help though.

Yea it has to do with putting the code (don't have it but can get it from LR dealers) in using the ignition key and the door I think. Don't have both fobs. It's working fine ATM just flashing engine warning light and steady red light on dash.

changed battery old one was showing 3 volts. still not having it.

Long time no post. Defender 90 CSW 300tdi. Factory fitted alarm and immobiliser. A while ago I fitted the spyder bypass wiring, then (when the aux batteries for the alarm system finally gave up (2am) I disconnected the klaxon thing). Subsequently I have still needed the fob to be on the...

I know I know. Turn the radio up. Problem is the radio is busted too. So rolling along at 30 mph if I wind the window down there's a 'tinkling' sound coming from the front end I think. Also went i pull away etc there is a definite short , quite violent shake. I can avoid the latter if I can...

Thanks it was the mAin fuse replaced and holding. Next question: any tricks to successful rocker gasket renewal

Sounds logical I just parked it up and had to go away on business so will take a look later today thanks again for the comprehensive reply

So got into the defender (300tdi) started no bother drove up the road and the interior light came on , phone buzzed it was tracker telling me the power to the device was dead. Engine stopped coasted to stop in the clear. Immobilizer light is coming on and off ok but everything else except...

If its a whitr j plate csw it might be my old one but its deffo a solenoid issue and it might be a new injector pump as some of it is breaking up and jamming the solenoid. I ignored it and just kept stalling it to stop. Neew clutch followed shortly after.

Its not cracked im just a knob . They are made that way.

Noticed that the screen surround has cracked across the gutter and into the main frame below window rubbers. Both sides. Will slacken off bolts on 'hinge' and relax the screen as I think that's obviously the issue. Question is can it be easily welded (whats it made of?), does it need welding...

Just noticed the gutter under the screen has cracked inboard of both windscreen hinges (over clamping I suspect) . Need to check around there for leaks as well now.

I had a look at my passenger side door leak in the rain on saturday. I fixed the driver side by fitting draft excluder to the door frame to compress onto the door seal but this hasn't worked on the passenger side. anyway, in the rain I noticed that the drip seems to be coming through the bolts...

Boost pin and straight through exhaust plus new turbo pipes , the whistle is very noticeable, the acceleration between 40 and 70 in top is a different vehicle and the exhaust note is nice but not intrusive. . Also did the cam belt as an insurance. Lots of smoke if you boot it but nothing on a...

So ive ripped out the siren and will leave the battery disonnected for the next few nights until im happy that that might have been the problem

To resurect this thread. Any lightfingered johnny on here like to pm me with some info. My 98 300tdi defender. Has for years required me to switch off the imobiliser with the fob. There is no motion sensor fitted. Last night at 12.30 I had the adrenaline rush that is an alarm (which I never...

Like I said before, in a hurry with loads of typos. I've got two of these that you can have for a lot less than that £40 if you can pick them up.

I've got pair integral inertia seat belts only probkem im in wirral