Search results

Hi guys Tvr bought there exhaust down either side of the car like a true v8/yank. I'd like to do this to my p38, but with the fuel tank and air tank in the way it seems impossible, so what's everyones thoughts on this idea: A duel entry and exit centre box, coupled with a y branch to swap the...

Evening, Today I jacked one front wheel off the ground, fitted a fuse to put it into transfer neutral, and then turned the wheel by hand in order to check the operation of the viscous coupling. Now the wheel turned relatively easy and the front prop turned too, is this an indication of a failed...

Evening all, just a quick, does anyone know if the abs modulator kits are still obtainable, and if so where? I've searched and searched found plenty of info on them but no link to purchase, any info appreciated. Thanx

Morning all, Could somebody tell me what injectors I can upgrade to for 4.6 gems using the existing fuel rail, I know the Ford ones from a mustang fit but I cannot find any concrete part numbers anywhere, so many conflicting comments, u know there's a thread on here but I cannot find it, and...

morning all, just bought a eas lead for my hawkeye, but unless someone knows better i have to say im alittle dissapointed. i have a couple of questions as i dont seem to be able to find any user manual anywhere on web as to what all the info means in the sub menus. firstly what does...

morning all, you know a guy once said on here, i cant fix this thing fast enough, and you know after 6 years of ownership and completly rebuilding virtually everything, spending a small fortune, it seems this thing just keeps dishing out sh****t. im nearing the end of my patience!! so, does...

evening all, a hope in hell i know, but i gotta ask, anyone got a pair of tornado chips for 4.6 for sale? pretty pretty please!

hi all, some **** smashed my driver side door mirror casing tonight, electrics and mirror are fine, but casing is no more. anybody got a colour coded black drivers side one for sale, please.

hi all i have the hawkeye diagnostics, but i think it is limited as to what it can do. i.e i dont think you can set base idle on the gems with it. my question is, can you do this on a nanocam or faultmate, i know you can on testbook, but is testbook a cd you install on a laptop, and then get an...

morning all, right and i dont mean to be blunt, just frustrated by the lack of a straight answer to just one question. does anybody have the accurate non guess as to how firm the top hose of a 4.6 should feel as if it were new. no matter which forum you ask this question nobody seems to know the...

hi guys, looking under the bonnet at night i can see the spark plugs arcing around their body, i changed the plugs, but still the same, engine is new and run on lpg with magnecor leads, does anybody have any idea what the cause of this is and the remedy. thanx in advance.scott.

evening all, my 4.6 rr has had this very intermittent fault for some time now and i cant find the cause, the engine is rebuilt with about 3k on it so far, but i did have this problem before. it runs multipoint lpg, but the systoms exist on petrol and lpg. basically most of the time it is very...

after just having a thread removed and not being able to post in for sale section due to lack of posts, how prey tell are you suposed to offer anything that another member may require ?:confused:

hi guys i dont suppose anyone has a set of low mileage v8 4.6 rockers that i could buy and pick up today, near to dy6 area? thanx

hello guys, im torn about whether to use standard lifters or rhoads lifters when i replace my cam with a crower for more torque. my concern is about the noise generated at idle with the rhoads lifters, does or has anybody had experience of this valve train noise and if so exactly how bad...

:confused:hi ok heated seats, striiped both seats repaired broken elements, warmer thermostats, an all has been fab. now the drivers seat is still fine but the heater on the passenger seat stoppe working, checked the heating elements for continuity, alls fine, checked all plug connections...

morning guys, just a quikie, has anybody made up their own suspension diagnostic lead for the hawkeye? thanx in advance

hi all, great forum and hope i can add to it in future, i have a cruise control problem, basically it stopped working !. replaced all vac pipes checked all connections vacuum pump and gone through the tests in rave, have narrowed the fault down to the becm, i do not have the 5volts as i...

hi, really need help on this before i burn the car out!!!!! started off with drivers side only blowing cold air, hot on passenger or whatever that set at. so im thinking blend motor, stripped dash out, checked for sticking flaps, all ok. next removed blend motors on drivers side and powered up...

hi all, first time actually posting on here, what a brill source of info. current model 4.6 hse p38 in gleaming black with 22s, and i love it! sorted out a hell of a lot of probs myself, including heated seats, air bags (suspension), valve block, discs, etc,etc. nedd a little help on this...