Search results

Can anyone explain this on the circuit diagram attached (taken directly from the 110 manual) . It shows the circuit layout for the dash board lights. 'h' is the direction indicator light (I've marked it in green). It has two positive feeds GW (green/white wire) for indicating right; GR...

I've been sent this - posting it here as it may prove useful to others . . .

And additionally - does anyone know the pin designation on the four pin flasher relay - using my multimeter it looks like C2 - Trailer-Tell-Tale 31 - Earth 49 - +v supplied by hazzard switch or alternatively indicators when ignition on 49a - earthed when either hazzards or indicator...

Further reading indicates that pin 3 'earth return' is just a chassis earth. I've check the continuity and it's good. However the previous question remains - what circuitry activates the dash trailer-tell-tale when a trailer socket is plugged in? (it's a 7 pin 12N socket) - is there something...

Thanks for the info on the hazards switch - makes sense. The circuit diagram in my landy manual does not show show how the trailer electrics are connected into the landy. Anyone got a copy of the diagram? Also - anyone know which part of the circuit activates the dash trailer-tell-tale? The...

. . . and one additional clue . . If I unplug the hazard switch the indicators stop working entirely (ie no indicator lights come on anywhere and no sound from the flasher unit when I indicate left or right) - I wouldn't have thought that that should happen but happy to be corrected . . .

Hi, County 110 reg '85 - symptoms and what I've done below . . . When hazard lights are turned on without the trailer attached, the dash trailer-tell-tale light flashes but the indicator light does not. (potential MOT failure). Otherwise electrics all work fine - ie indicators when...

Thanks - learning something new every day!

Hi, I've a County 110 - reg '85. The chrome on one of my headlight reflectors is flaking off so I thought I'd replace them with a pair of RING RL080 Halogen convertors. I've just received them. I thought it would be a straightforward job - but one point of confusion has arisen. The two...