Search results

disomalc - Thanks but an G/B filter and new oil was given to the car less than 2 months ago by th land rover dealers.

Good Day What would the cause be of the gearbox, from time to time Jerks when changing gears. Sometimes 3rd, some times 2nd....

bodie Jip, I just found out that the rear one's are also just started to leak.. :doh:

I had similar problem with gearbox and changing of gears, at the end it was the Kick back cable that stretched. Fixed it and seems to be fine now...

Had similar problem, ended up being the TPS that was faulty.

Aish... Sorry to hear... I would get a bulldozer and demolish there house... If they ask WT## are you doing??? you just say sorry , Wrong house....

4father Thanks for the info, I have a gut feeling that the leaking Bellows is not the only problem I have. :doh: But will wait and see when this is replaced.

wammers Thanks for the reply... Will replace the front one and see what happens.

I am looking for help, PLEASSSSSE Car: 1996 HSE (RHD) Problem: When Parking the car, I leave it at off road mode. Night past and a little bit cold. The next morning the car on bump stops, but no EAS Warning. If starting to pump the EAS up to normal mode it will take forever to lift, Then...

Why does the ABS Booster leak at the bottom of the unit. Leak is at the bottom where you can see three screws. 96 P38 HSE

Honestly , Those are the 2 things I have not checked. I will look into this. Thanks..

Good day to you all CAR: 1996 Ranger Rover 4.6 HSE I have post numerous times problems regards to my Range Rover, and are now fed up... I have two major issues on the Range Rover: 1) ABS/TC/HB Lights on Dash Board are on and I have no brakes and message from diagnostics saying "no power on...

I switched the aircon on and there was a small blue light indicating a electric fault, i presume and heard a sort of relay ticking in or under the dashboard. can the HEVAC draw so much power that it will have an effect on Gearbox of cruise control??? PS: when aircon is switched on, the car...

wammers Thanks for the response. Do I need to bleed the brakes after installation?

Yes, that is correct, and Thank you I have the RAVE CD. I am just asking if there are things to look out for... Manuals are great, but not always correct. Thanks for the reply.

Good Day I would like to know how to replace the ABS pump on an 1996 Range Rover HSE. What too look out for... Thanks

Does any one know where I can buy these loose..

Thanks tommo138 I will give a go...:cool:

Good day On the Photo's , can you tell if this needs clean up or to have it replaced... Thanks

tommo138 - Thanks I will create a new post with the photo's of my fuse box. Thanks again.