Search results

Hi, I'm looking for a pair of complete defender doors. I don't mind a little work on them. Close to west wales as poss. Thanks

I do. Both diffs have been changed. When I lift off the throttle I get a "Pitted Bearing" noise back through the truck.

what was the conclusion of this?

HI, I've been getting a loud whine/screaming noise when decelerating on my challenge truck. Both diffs have been changed and front output bearing on the transfer box changed. Still have the same noise. Any ideas? Thanks

They like a sniff when run out of diesel.

"ignition on for 6 x secs"? Try this.... Turn ignition on. Now push the throttle down through its full travel 4 times one after another.. You should hear the fuel pump cutting in and the engine management light flash. leave it run its cycle, this should take around 6 to 10 minutes. in this time...

So I built a challenge truck back in the summer. I no master fabricator but I've always wanted to try my hand at building a tray back. So on completion I fitted a set of beadlock wheels with 37" tyres. There started my problems.... Over speeds of 40 mph I would suffer a slight wheel wobble that...

before you strip the tank out... I believe you found a pipe leaking at the fuel filter... and this has been fixed. Complete a fuel purge cycle. When this has finished get yourself a can of easystart and give it a sniff whilst turning the key (you will need assistance). Don't go crazy with the...

have you fitted a spacer under the CPS?

did this for the third time recently. But this time I have fitted the stud kit from allisport with the expansion pieces.. so far so good

And that’s where I shall leave it. Thanks.

Thanks all. So I’ve finally got a boost controller.. I forgot to add that I’ve had a map sorted with the boost limit raised so no issues there. Can some one enlighten me on how high you can push the boost? The turbo is boosting as stock at 24psi. Thanks all again

sorry for the late reply. I have read that you can adjust the thread and lock nut?? Any ideas?

Hi, can someone point me in the direction of boost adjustment on a VNT? Ive had it fitted a while now and wish to up the boost as I have an oversized intercooler fitted. Any help would be appreciated. thanks

Is he referring to the viscous fan?

Sorry to pull up an old thread but could I please have more info on Boost adjustment. I see the stop that the arm attached to the actuator sits on, which way is this adjusted? thanks

was this resolved?

300 tdi station wagon P reg Bulkhead gone and chassis is not the best. Thinking of selling the chassis and body with log book and keeping the engine box and running gear. £1500 for body, chassis and log book. Let me know what you're looking for

No, I had edited my original post. Don't let it worry yourself. It's sold

******PRICE DROP £4750************