Search results

Try asking on here mate, there's more info on the tdci's DEFENDER2.NET - Index If i'm not mistaken the fuel pump is a high pressure engine driven pump same as most modern diesels.

towed around a dozen cars tonight here in Rotherham, 6" deep easy :)

As said above, for the brake servo vac all you nee to do is drill the inlet manifold and put a steel pipe fitting into it, this the connects to you vac hose from the brake servo (about 8mm bore iirc) not the same manifold, but something like this

very nice, I s'pose that's what 100k+ buys you ;)

I wouldn't bother re-fitting the viscous fan, the 200tdi engine runs very cold and you wouldn't notice any difference in temps without it. I never had a fan fitted to my old 200tdi, the engine would still only just get up to temp after a long run. Give it a try and stay local if you're worried...

Thanks, I'm not too keen on the satin silver grill and head light surround, oh and in typical Land Rover fashion the steering wheel is ****! it looks like they found it in a cheap 80's kit car.

Ta mate ;)

tried a couple of times but the image won't work either from Flikr or Photobucket? so here's the link. http://s245.photobucket.com/user/zx10dazza/media/IMAG0607_zpsecc3d8d9.jpg.html?sort=3&o=0

sorry tried to post a pic, but somethings gone wrong???? I'll try to sort it :)

After a few yrs away I'm now back in a Defender, we px'd our Fiesta ST in for a new Defender 90 Station wagon XS in Santorini black. The car rolled off the production line on Friday the 21st Nov and was in my ownership yesterday morning. So what does it drive like? well after my 1990 200tdi...

Selling my Landy to fund my racing for this year, will be sorry to see it go but needs must.eBay - The UK's Online Marketplace

Ebay, Difflock forum is also worth a look.

Got a pair of BMW 325i coupe seats that I was going to fit in the front of my Defender, Seats are pale grey, no rips or tears in them. F.O.C. collection only from Jcn 1 M18 Rotherham. Seems a shame but if no one wants them then they will go to the tip this weekend.

I've always been interested in doing this myself, You could mount it to an r380 box as used in the manual version of the rangy, but think you'll need the short bellhousing. The M51 motor is a very good engine, 134bhp std, but was a bit weak in the RR as the RR weight was 2t plus, so in a...

Hi guys, I changed my transfer box a few months back as the original one needed a new input gear and new bearings. So now I have the old one stood here doing nothing. It's been steam cleaned and striped, needs new bearings and the input gear eBay - The UK's Online Marketplace Going to the tip...

I did mine last year, you'll be needing new brake hoses/pipes, Ideal time to replace all of the suspension bushes and clutch! Lots of M8x25 bolts M8 repair washers and M8 nyloc nuts. You'll be needing plenty of cutting discs for your grinder (use 1.5mm slitting discs), get a few able bodied...

Just stumbled accross this on Pistonheads Nene Overland : LAND ROVER DEFENDER ICON SPORT WAGON 46K for a fookin Defender!!!!!!!!!!!!!:eek:

Hi guys, my g/box is getting very tired, the shaft has quite a bit of wear in it, so I'm on the look out for a good 2nd hand box or a recon one. I have found this on the web, has anyone on here used them? thier prices seem way cheaper than anyone elses. THORNTON 4X4 BREAKERS - LANDROVER

I have Mitsubishi evo 4 seats in mine, fit ok but I was thinking of going for some height adjustable seats because the landrover seatbox is slowped down at the rear, giving my evo seats a low ride! I have since fitted 2" plastic blocks to the rear seat mountings. I know quite a few lads go for...

Is this deffinately going on this weekend? if so what day and are we meeting up anywhere? How many are going to turn up?