Search results

Air con systems all lose pressure over time, had mine regassed with a die added last month £50 it was almost empty. The fella said he had changed the air con radiator matrix on a freelander last month, ( a common fault) some cars have this "radiator" made of a brass fin construction, but now...

Sorted this problem, when fitting the EGR bypass valve I decided to remove the inlet manifold to clean out all the gunge, I found the nuts were loose to the front of the manifold housing, (square inlets) and could be removed by hand. After mucho cleaning with Halfords foam degreaser( lemon...

:):) Med me laff too:):) Ta Ming:D

No probs Chaser , I can see what your saying now, keep it simple cheap and cheery. Thanks for clearing that matter up. Ease off on the tablets, you"ll end up with an headache!! Cheers again. Amo :cool:

Hi chromium, I was a just tad concerned that with the original set up having a rubber hose in the circulation with the egr valve it may be wise not to connect these as a rigid unit. However the original bypass units seem to work okay, and as you say are strong enough for the job. Thanks...

HI chaps, sorry for being so blase about the measurements but in hindsight I was looking for any tried and failed attempts at the Valve/ blank, I am fairly new to the site and as such hadnt checked thresds, I have now and I have mucho more information and other methods of blanking off the egr...

Thanks TDJohn for the info, i will try to make this outta staino and put a flexy stainless pipe to the blanking plate. Thanks again.:) Alan

Thanks David I am working through all the threads to get the full sp on the mod, some good info stuff on this site. Ta:)

Thanks David, I assume everything works ok with the plate blanks on, i will give this a go this week . Ta :)

Thanks Chaser I knew I could rely on an a true officionado of the Landy realm to help out. :p

Hi Guys I am looking to fit this moddy to my landy I can probably make this unit myself ( i am a coded welder and have lathes etc...) can anyone give dimensions of an original unit that works on an engine , (I have heard some mods dont fit correctly) i.e pipe dia,. and lengths of both tubes...

Hi Guys, I Hav bin reading with interest the EGR blanking moddy, i am about to do the same fit to mine and looking at the item on Fleabay it looks fairly simple to fabricate ( i am a coded welder and have a lathe etc...) A question I have is: Is the valve an actual valve, and what is inside...

Hi Booboodag, I have a similar problem to yours with the engine man,. light did you the find fault or did you change any bits and pieces. Alan

Hi, my freelander Td4 es 76000 miles has a slight problem, when driving at no set speed the engine man., light comes on ( the one with an ! mark in ) with a slight drop in speed followed by a small smoke plume from the exhaust, the light then goes off and after 2-5 miles it does the same again...