Search results

The gearbox Drain point is a large, 32mm headed plug on the drivers side of the gearbox. Directly above it is the filler plug, which is a torx 50 grub screw. I had to clear built up mud off mine to be able to see it the first time. The transfer box has a 17mm headed bolt at the bottom to...

Yep, fitted no problem, the locating pegs at the bottom into the radaitor were a bit tight, are you sure yours is locating properly? Other than that, no complaints at all. Thanks Matt

Ah, looking at RAVE it suggests that there should be some bulbs above the instruments between the dial faces and the clear cover that should illuminate the cluster. Mine doesn't have these working, so i'll strip it down and check the bulbs. Cheers Matt

And you have the white needles too then? (in daylight) I just thought it odd that all four needles where un-illuminated, so i didn't think it would be a bulb

Hi All, Discovery 1, used it for the first time in the dark last night and noticed something odd, just checking this is 'the norm' before i modify to sort it.... When i put the lights on at night, the dials all light up green, back lit green light and all the instruments can be seen easily...

hi all, I was just about to get some wheel spacers to give me more steering lock on my Discovery 1 with 265/75/16's on, when i read an old post saying that someone swapped to modulars and gained more lock. I'm assuming this is due to the offset, anyone know 1) What ranges of offset the...

Just two on my car, oil in and out, TDI300 Manual Cheers Matt

Cheers chaps, that'll teach me for posting a thread before taking a wheel off to have a look! Cheers Matt

Alright Andy, Indeed i am, small world haha matt

Hi John, Sent you an email, but as i said in it, PM on here is probably best. Here's the adaptors, and a drawing i did quickly to show the dimensions. Thanks Matt

Hi All, Looking for some wheel spacers for a discovery 1, but i want some set requirements, and i haven't had any luck finding a set that meet these needs- 1) Steel 2) Proper 'Hardcore?landrover OEM' Nuts and Bolts fitted/included 3) 'Hub Centric' with a raised lip for the wheel to sit on...

Have you seen this thread? http://www.landyzone.co.uk/lz/f8/over-heating-problem-73120.html http://www.landyzone.co.uk/lz/f8/radiator-suitablility-differences-77532.html I had a overheating problem on my discovery, AA man checked the head over and confirmed the head gasket was ok and...

Not sure if it helps, but i got a radiator from LR Series last week for my Disco 1 (1995) Diesel Manual, and a Britpart one arrived. I believe i ordered the BTP2275 radaitor and it came with the adaptors pre installed. I did however unscrew the adaptors from my old radiator before i took it...

how about loctites stud and bearing fit? "We have a wide selection of Loctite products available. Loctite Stud 'N' Bearing Fit is effective in facilitating the refitting of bearings into worn bearing housings. The compound securely seals between the bearing and its housing to eliminate...

Hi All, Doing a pinion seal on the Discovery 1, the guide says that the loating pin/cap should be re-installed with loctite 601 or 638, i'm struggling to get some locally, and mail order is too slow. Is there anything else i can use to do the same job? not really sure why the loctite is...

Cheers All I'll stick to discovery 1 wheels Matt

Hi All, As title really, i've searched and searched through loads of old threads which they mostly cover tyres that can/cannot fit, so i'm up to speed with that. But i'm concerned with the wheels, are TD5 wheels different offset/pcd to Discovery 1 wheels? Thanks Matt

I have a similar problem, i've changed the water pump and thermostat and it still overheats on the motorway, from the front the rad looked ok, but when i took it out so i could get a better look at the back, without the fan in the way i discovered my probelm, might be worth whipping yours out? I...

Hi All, Small update, i dunno what the differences are, but LR Series has advised me that BTP2275 is the one for my car, so i've ordered that. Cheers Matt

Hi All, I'm reading an old edition of LRO, and it mentions making a radiator blind out of rubber sheeting for off-roading, to prevent mud going in your radiator. Seeing as my radiator has just capputted itself, due to mud build up, i'm considering making one of these things, but i have some...