Search results

I fitted a new clutch cylinder and looking at the inside of the pipe connection it looks like a bubble flare fitting and not double flare which it should be. Can someone confirm that and can I use double flare in a bubble flare end?

can anyone tell me the rim size in the picture below, am i right in thinking they are 6.5"? cheers

I am having problems with shifting red knob gear when the plug and spring plunger are put in. it seems the only position that it allows me to screw in the plug is with the gear in the back position but once in i cant shift it? is there an intermediate position as on the diagram in the workshop...

I am in the process of restoring a serias 2a and need some advice on painting/ preparation. at what stage to I use etch primer? before or after filler? I was under the impression etch primer was only onto bare metal and not filler but a local paint shop told me to use filler then primer, before...

Hi guys, I wondered if someone can shed some light on a small problem I have. Firstly I want to mention that I am in southern Tanzania about to cross into Mozambique but any work is best done here before I plod on and get a problem, as Mozambique is the wild west with no spares whatsover. I...

I recently changed the P gasket and viscous coupling and before I did the temp gauge worked and read normal, since completing the job I now get no reading at all! Could the viscous coupling be faulty? Or could there be air in the system and therefore not giving a correct reading?

I am planning a trip from Windhoek (Namibia)- Dar Es Salem (Tanzania) towards the end of the year, not exactly sure about dates still need to see with work but most likely end of Ocotber- end Dec or thereabouts. I don't have a route in the pipeline other than I want to see the northern...

I am looking a travelling partner (male or female) to join me on a trip at the end of the year. The planned route (and this is not set in stone) is to drive from Windhoek to Mozambique through Botswana, spending time in the Kgalagadi Transfrontier Park before traveling on through S.Africa and...

has my clutch gone if all the engine does is rev when placed in gear, unless I use diff lock and then it is OK or is it the transfer box?

I have a 1997 defender 110 Td5 that is makeing an odd noise. When you lift your foot off the accelerator there is a whirling/grinding noise coming from the rear (maybe to the right ride slightly). If you put the throttle back on the driveshaft clunks slightly and the noise goes away. I was...

not sure if this is the right place to put this post but looking for an expedition prepared landrover, maybe someone who has recently returned and needs to sell their vehicle? Cheers Ben

I have a few questions about a series II which i am looking at buying. was the series II discontinued once the series IIa was introduced? or was it still produced until series III came in? How do i decode a chassis/ serial number? Thanks