Search results

yeah looks like ill go to the local motor factors tomorrow and get a few bolts just need to be careful they are not to long thanks andy

hi dave yes your right its a waterway if i remember its the same size head as the head bolts but smaller in length all the bolts i have have been to small and the head bolts are all in place now so dont really want to remove one of them again thanks andy

got the head back on but im missing a bolt :doh: didnt even need to come out and its now missing its the one in the middle of the two head bolts in this picture can anyone tell me what it is , what size it is and here i can get on asap :rolleyes: thanks andy

thanks for the info guys :) i really need it back on the road asap but i think your right would be silly if i didnt get the head skimmed does anyone know where i could get it done in consett, county durham ? thanks andy

i thought i might as well take the head off and see what the damage is i have taken a few pictures of the block and the gasket and i think ill get away with just replacing the gasket for a thicker one what do you guys think ?

thanks for the info:) i had a chance of buying a hole disco with a 200 tdi in it but i would rather not bother if its not a straight swap

thanks for the replay mate :) ill look into this

my head gasket has gone on my 300tdi :mad: when u start the engine the water shoots up about half a foot from the expansion tank is this normal or am i looking at the head being warped or a crack in the block ? if im replacing the engine would a 200tdi be a straight swap ? i have just...

thanks for the replays guys the water pump is fine but think the temp gauge might be faulty and the thermostat is defo fooked as is the heater matrix. i was driving around with a mobile sauna :p but have bypassed the matrix and is fine now

the other day my temp gauge started to read that it was over heating then suddenly dropped then back up again then back to normal ,so i put it down to a fault with the gauge . now this morning on my way home the car started to fill with steam and i put that down to a fooked heater matrix so i...

like the pics mate, the first one is amazing :) the defenders look good against the derelict buildings

na mate not as daft as me :p i used my transit van when my car was of the road to do takeaway deliveries, made a small fortune doing it :)

hi mate you should have a look at this MIG Welding - The DIY Guide lots of info and pics hope this helps :)

i know what you mean when i was 17 i had a polo gt got quotes from 1000 to 3000 quid unbelievable how companies can justify it . you dont go into asda and get a tin of beans for 50p then got to tesco and they cost you a fiver

have you got any pictures of it ?

i have been trying to find an answer to this question for some time now.........but i dont think there is a reasonable explanation as to why you would do such a thing :p

thanks mate, brilliant ill get a tyre for the forth wheel ,get the angle grinder out and get the wheels on :cool: and when i get the money together ill sort the suspension

i have got hold of 4 15 inch rims one with no tyre 3 with conway 31-10.5-15 i have put two on the disco to see if they fit and they dont foul the brakes, i can get full lock etc, but cant take it for a drive as i dont have 4 wheels & tyres the same size. the arch clearance is a lot...

thanks for the replies guys, I was thinking i would need to get two sets of wheels & tyres to do both jobs, but looks like their are a few all rounder tyres i can pick from :) thanks andy

I have been looking for tyres for my n reg disco and was wondering what to get . I do lots of motorway driving and want to do a bit of light green laning so m&s tyres would be out of the question because of the high temperatures they would reach on the motorway ?? also can i fit defender...