Search results

Hi Mikesuba Yes I have read this and other forums my gague was working ok before I replaced the blower motor. I was considering draining the system and refilling it again.

Hi All I have an ex military 90 300tdi Auto ( engine from disco). I had to replace the fan motor for the heater which is all in and working, however my temperature gauge now jumps to hot why would it do that? I'm pretty sure I've bled all the air out 90 drives ok. Investigating further I was...

Hello all I own an ex MOD 90 300Tdi Auto, it has series doors and windows the front RH window has lost its slanting anti rattle channel which allows the sliding window to open and close and keeps the wind and rain out. I'm having trouble locating a replacement does anyone know where I can get...

Being one

Hi Mine was found nearer the door than the tunnel but was easy to find in the end just a question of routing around a bit.. Gary

Hi the clues in the user name Dorset.G..

Your TD5 will show these syptoms when the fuel pump has failed or possible fuel line/filter blocked or restricted, it has a default mode limp home which sounds as if it has kicked in, check this out and clear the fault code and it should be fine..

V

This sounds like a fuel feed problem, check relay, and fuses, fuel filter and pump

Hi It works plug and play I'm very happy indeed Yippeee

If I can't find the loom there will be a CC ECU SCB100211 for sale shortly...

H

Hi TD John I do have cc ecu SCB100211 but I am having trouble finding out where to fit it, I'm trying to locate the connector which should be under the drivers seat somewhere but as yet no luck..any ideas as to where I sould be looking??

It sounds like it could be an ECU fault.. best advice is to get it back to LandRover and don't let them fob you off...with excuse's

Having just reread the entire thread clearly you mention the ECU and it is as I expected by it not being in place, how have you got on so far with getting the cc to work.G

Hi Have you got this CC of yours to work yet? I have same vehicle as you and am going to attempt the same fitment, I have Master switch, CC set/resume control, and an ECU SCB100211, you have not mentioned the ECU in your thread so have you checked to see if you have one fitted and if so where...

I have 2004 TD4 auto to which I am attempting to retro fit CC I have the master switch, I have the set/resume switch, where will I find the ECU? I have looked under the Drivers seat, for one or the wires..but if it's there I can't see it.. any useful info would be great..I'm going to fit the...

Umm I'll soon have one fitted up, hows your TD5 for total systems failure....now that is a bitch,....

Mines done 188,000 and is still as sweet as ever.. anyone out there better that..