Search results

Hi to all, been on here for a while but not posted much but now I have a question, Got a 90TD running a 200TDi from a Discovery. The front axle needs a bit of tlc. I know the diff has a bit of play, the nearside hub is the original but the offside is from a Discovery replaced years aģo when the...

MarkC123, Yep got a second water heater in th back of my 90. Made a box out of MDF, heater matrix and fan from a Volvo440. plumbed into the heater to engine rubber pipes. Use a relay to sitch the fan and it sucks the air in from the back. Its great, the best demister for the back!

This what your after? Land Rover Defender & Series 2 & 3 Extended Bulkhead Repair Panels - YRM Metal Solutions

All i did was make sure all the cables are adjusted, all the air gaps on the heater box are sealed. You might need to strip the box down and re pack the foam round the matrix then bleed the air out. Thats all i did on the last two, made them proper toasty. Ehat i did find was every one in the...

B&Q have that bubble wrap silver backed insulation stuff in at £12 a roll. Did the back of mine out at the weekend, was going to see what's like before any fancy carpet covering.

if its blowing and the cables move then the flap inside the heater box is not sealing or it might not be gtting enough air. check the air intake in the wing also the seal between the wing intake tube and the heater box

This sounds like an earth connection faulty. Most lighting faults are down to earth. cant be the relay earth cos if that was faulty nothing would happen Sounds like the lamps earth. You said to the bolts holdingb the steering guard. Did you take just the bolts out and bare the metal back? What...

Why is it that this subject comes up each winter!!! There is nothing wrong with Defender heaters they work great. Blow loads of air nice and hot out if and only if they have been adjusted correctly. Mine gets so hot that i have to turn it down and thats in a Defender with van sides...

As VSIB have gone you might find a TRi registed installer (part of Thatcham) can sign it off

Sorry you cannot do this now as the VSIB went bust last year

Belts fine so is the oil level

I think me pumps gone! With the engine running should you see any movement of the oil in the pump resviour? (spelt that wrong!) cos have not got any on mine and the steerings gone heavy. Cannot see any leaks nor anything bent.

Visited that place tonight on the way home. Its gone up he is selling Biodiesel at 89p litre, its made from waste veg oil (WSVO) not Reapseed oil. Reapseed oil he can get but has a price tag of £1.40 a litre! This is due to HMRC putting a charge of 54p for fuel duty. he will not sell it...

I know that place, was up round there this afternoon, saw the sign. Do you know if he will fill straight to the tank or do you have to take a drum?

Brillant, Can we have some details? Also anywhere round Salisbury Plain you would reconmend??Heading up to the Plain this afternoon with brother in law.

Wiltshire Landyman, would he sell some to me? Your in Durrington am in Shaftesbury not very far worth it me if he would. Ran mine on the stuff last year, goes better than diesel. Thanks

Oil in the ECU loom?? Change the ECU loom and see if that helps.

This is all still very interesting reading. Some of youmight have seen from another thread that i had a little smoking when i had a try at this, to the point I could have sold the 90 to the army as a smoke machine!! As I was using old engine oil (tractor oil in fact) i think the thining was just...

I agree with D.G.F.S could be starter. This sounds just like the last time mine failed, we had spent the whole day out and about stopping starting etc. Next day click that was all. Check the following: Charge and check battery, check wire connection point all good inc earth point on engine...

I know that down at Brookyn 4x4 they have a steel body 110 complete with rusty wings!. I asked them about that they said it was a export version for hot climates hence the steel used not alloy.