Search results

Well I decided to open up my inlet manifold chamber as it was rattling, obviously the valves inside which locate onto ball and cup sockets had come adrift (broken on 3 valves). Now with the cost of replacing said item I figure the valves were stuck open anyway just rattling around. I decided...

thanks guys it was the cause, after replacing said components all seems well leak wise. However other problems are now with me...see my other thread.

second post for me. trying to remove the thermostat from my 01 v6, problem Iam having is removing the hoses from the thermostat housing. The hoses have a plastic end with a metal "u" shaped pin on. I have pulled the "u" shaped pins up but for the life of me cannot get the hoses off. Dont...

I have an 01 freelander,60k just. Symptoms: loss of coolant, constant topping off. So today I figure I will get the spanners out and find out whats happening. I check the coolant this morning and all is ok, pink and dandy. I check the oil, all looks ok again. No visible leaks around...

Hi, this is just a quick overview of my airspring episode. My disco would go down both sides and stay level, it would then reinflate no probs the next morning. Sprayed soapy water on the airsprings and found that one had a leak replaced and all is well. However I thought that it was starnge both...

thanks for the advice, will crawl under her tomorrow. The water idea is good, never thought of that.

I have a td5 which is really nice, however I had a leaking airspring so I replaced them both with parts from Paddocks. Replacement was really easy and before long the vehicle was behaving itself with no air loss whatsoever. Now about a week ago I came back to the vehicle and the dreaded lower...

the actual handbrake is getting hot, very hot, the brake shoes work on the propshaft. The brakes arnt sticking/binding at all.

Hi, i have a td5 auto on a 01. the handbrake is getting really hot when iam driving it has always been like this, any suggestions? could it be the shoes on the propshaft? that is the only thing i can think of. the brake dosnt seem to be sticking. thanks