Search results

anyone know how to get one of the new warn winch controllers apart? my in buttons packed up and i want to have a go at fixing it, looks like its sealed? pic below

ive just finished installing my winch on my 90, its a warn 9.5xp with a albright solenoid in the engine bay. yesterday when i was winching i was pressing the winch in button on my controller and nothing was happening, no winch movement and no clicking from the solenoid, after 4-5 times pressing...

ive fitted some +5" pro comp shocks to my 90, and being a bit of a ding bat ive lost one of the rubber boots would it be ok to leave the shock with no boot or is this risking damage? also a tyre question. im hoping to order some new tyres next month, ive been looking at the insa special...

few weeks ago my handbrake started making a rubbing noise, thought nothing of it, a few weeks later my prop shaft snapped, when changing my prop i noticed the retaining screws were missing from the drum, couldnt source any so just fitted the prop hoping it would hold the drum in place. last few...

got a defender with van sides, and fook me its been pretty cold in there the past few days, doesnt help the heater doesnt work but thats also on my list to fix, ive been thinking about lining the back with some wood panels with a bit of insulation between the wood and the van sides, what...

want some special tracks on me fender, found they did well on the disco, apart from thinking i was being followed everywhere by the police helicopter but am baffled by sizes. was looking at 285/75/16s but ive just been pointed to the new size of 33x12.50x15 whats the differences?? and...

just been down the motorway in my 90, was very clunky and juddery, came off the motorway and as i went to pull asway there was an all mights bang and loss of drive. rear propshaft sheered completely. just dropped the rear shaft put it in difflock and limped home. question is how long can i run...

i was given a pretty nifty steering wheel for me 90, she was built in 89 and has the 4 spoke wheel, can anyone tell me what boss id need to fit me new wheel? same as this wheel MOUNTNEY SPORT STEERING WHEEL ( LAND ROVER BOSS ) | eBay

I'm fitting +5" shocks to my 90 over the weekend, I had +2" with not needing to change my brake lines. I realise now that's I'm fitting shocks with longer travel I will need longer lines. Does anyone know what size I should fit as all the kits I've seen are +2" surely these wil not be long enough?

bring back the disco all is forgiven.......except the rust well i bit the bullet and got meself a 90, few problems with it so far, electrical fire, fooked prop and lots of rust :mad: my annoyance at the minute is i got a lift kit for her, +2" bearmach springs the hd stiff ones, and a set of +2"...

Ive got a 89 fender 90. Just giving it a full service as Ive just bought it. Went to buy new oil for my diffs and tranny box but completely forgot what oils it is I need. It's a lt77 box. Can someone remind me please?

any one know where i can pick up some black vehicle carpet to line the back of a deepender? like speaker box carpet or simmilar? been looking at VELTRIM on egay but its a bit pricey :blabla:

been a while guys, had to sell my disco a couple of years ago, never really come to terms with her going :doh: but today i put a deposit down on my first ever defender :D pick her up on friday and i cant wait. got a few bits of work i want to do on her, so just a couple of questions i have...

anything over 30 mph i get a wobble in me steering wheel, a funny noise from passanger front wheel simmilar to cv joint on its way out but cv are 2months old also noticed my steering wheel is off centre any ideas ?:(

noticed a wobble on the front driver side wheel when i go over rough roads or speed bumps, been underneath but all looks ok, only thing ive done is try an get the ;panhard rod bolt out but couldnt so put it bk together an left it, any ideas?

noticed a fair bit of oil "oozing" from both ball joints and a build up of oil on the outside of them, clunk when i turn. do they sound fooked?

need to "trim" my arches to fit my new tyres on (more like massacre), now the front look simple enough but im concerned about the back as its got rear doors, how do i go about doin them?? also im after a spacer to fit a insa turbo special track 265/75/16 tyre on the spare carrier can anyone...

anyone got any lockin nut keys knockin around? dont know the code but its a circle with lots of small slots all the way round?

i was tryin to fit my new steering guard before an noticed a big patch of black gunk on my diff, it was silocone an i stupidly picked it!!!:eek: noticed it had been welded underneath but all seemed to be ok, just went to check the car was locked etc an notice a huge puggle of diff oil thats...

:confused: my locking nut key has gone missin, anyone know where to pick one up, the fleabay ones dont match. its a circle with loads of cuts in all the way round?:confused: