Search results

Thank you to every one that has helped. Today i replaced the module behind the glove box and every thing is now back to normal. Thanks again for every ones time.

Ive tried a few different ones but can only get the Autel to connect at the min. Will try the Hawkeye again and have a look for voltages. Thank you for the help

I have given it a good drive but sadly no luck so far

Yes. To much flex and it pulled the plugs apart. Will have a start in that corner this weekend

Have reposted in different location

Good afternoon every one. Any help would be massively welcome. Sooooooo, Managed to unplug one of the abs sensors down David Bowyers at the weekend, lights came on. Easy fix i was thinking, plug it back in and delete code and will be good.........How wrong was I! Have a Pump fault 3 and sat on...

Good afternoon every one. Any help would be massively welcome. Sooooooo, Managed to unplug one of the abs sensors down David Bowyers at the weekend, lights came on. Easy fix i was thinking, plug it back in and delete code and will be good.........How wrong was I! Have a Pump fault 3 and sat on...

Good afternoon all, Has any one ran braided lines in the across the axles? same with the abs wires? What is the best option when looking to increase suspension drop?

Oh dont get me wrong im not blaming the truck 1 bit. But while im in there if you know what i mean

have BFG MT on. 285/65/16 i think

I have been told to put a rear in. Pushing is better i guess but sure its a matter of opinion

Thats what ive been thinking.

Thanks for your advise. I have not had one notification on any of your post but they are all very well recived. Thank you all

Sooo after my second drive around day and second breakage (first time twisted the front prop up) this time the rear diff has tried to escape through the axle o_O. Can some one please help me with what to upgrade. Ive got a second hand axle and diff ordered up but thinking I may as well swap out...

At about 1500rpm and all the way from there i get a strange vibration noise. Have narrowed it down to the transmission tunnel as it is loads louder when i unclip the gear stick gator. Its in all gears and can get it to do it in all gears and even a little bit in neutral. Its worse on drive and...

Did you work out what it was?

Ok all is now sorted. Turns out I’m a heavy handed idiot

Just jumped in my Disco and this really will not stop clicking. Any one know what it’s for?

So when i got my disco 2 the gears were very sloppy, thought id treat my self to a synchro gears shot shifter. When in the box i noticed the bush was missing. So new one ordered and replaced with snap ring. First time out after fixing loose gears about 2 hours in. Strip down again and the bush...