Search results

There isnt any give away like that over it at all. Seems to be made like a richards with 4 pieces but is 3mm metal throughout

Evening all, after some advice on a chassis I've been looking at. its 2nd hand (not used) but sat for a while and is now being sold unused but the seller doesnt know who build it. Are there any tell tale signs to look at that will give it away easy?

Evening all, Just looking for a bit of advice on a check I would like to do to my axle please. Changed the flange seal yesterday and I'm worried I've not done the nut back to the place it was already at. I have to remove the rear cover as that is leaking anyway, what do I need to do to check...

Evening guys, looks like I'll be needing a new head due to a crack in mine. But looking at the vast difference in price is there really justification? Does anyone have any experience on the Italian heads all over the bay for around 250-300 vs the Spanish amc heads for double that? Thanks

Thanks, I have a new fuel pick up on it with new lift pump. There is a bit of debris in the tank I've noticed so next to replace is that. I out a new lift pump on it, delphi one with the pre filter so that catches the bigger bits. Also a new fuel filter too. Wouldn't have thought its electrical...

Evening all, Recently replaced my fuel pump due to running issues with the previous one. This replacement seems to cure everything, engine was ticking over good running and boosting exactly as you'd expect. However, a couple of times the engine has carried on ticking over when I switch off -...

Did the pump go? If not how much posted for it?

Afternoon all, looking for a bit of advice on my defender 300tdi if anyone has any ideas. The engine starts fine but idling is sometimes lumpy and hunting, but all the time the idle is fast. Probably over 1k, the car drives ok but is really low on power noticed especially in 5th on even the...

Morning guys, Hoping someone can help with the latest/last defender issue please. Bit of history first... Truck has sat idle for around 11 years now due to previous owner running on it everything but diesel I think. I've changed all oils/filters, changed belt and re timed it too. But the tick...

Thanks, would be good to advertise that because after more searching it seems most people have the same issue. £20 wasted on the spring. However, the master cylinder is a great upgrade for minimal price

Morning all, Fitted a LOF powermaster and powerspring yesterday due to leaking master cylinder, got it all in and working as it should but the pedal does stick down, seems like it goes past the spring return point so it holds it down instead of coming back up, is there something I've missed on...

There was 2 wires the wrong way around on the plug to hazard switch, changed both around but didn't make a difference. Cleaned every earth, still no joy! In the end took a drive to the local land rover repair garage and got a new hazard switch, fixed the issue! Surely I can't be unlucky enough...

Thanks, I will take a look when the weather is a little less wet! Assuming those earths in the middle of the chassis are on the transfer box to chassis? Also, I don't have a rear wiper. Should there still be and earth there somewhere too?

2 - what size ohm/ballast should it be? Never took much notice when I read what to use, the ones I ordered was 50w 60ohm. 3 - how do I bypass it? I have noticed, completely by accident when I unplugged it whilst indicators were on if only the 3 pins were contacting the loom then the lights work...

How is the led soldered to the housing? Interested to see if they solder across the terminals. Leds are only pennies so they could easily be made

Tried that too, not fixed it either. :( I put standard 501 bulbs in

Guess it's 18 quid spent then. Was only out off as it says if you remove dash bulb and it stops doing it then that wasn't the issue. Mine does it not matter what

I bought 2, hopefully I'm not unlucky enough for both to be dud

Bought the led one with earth?

Thought the same, just couldn't see a wiring diagram to see they have soldered it up to make my own