Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. J

    L322 L322 2008 3.6 TDV8 missing slightly lumpy

    Hi guys, I eventually replaced the seal on the 2 rogue cylinders and guess what ? I found a leak on the inlet manifold when running, along with the miss on one cylinder, so I’ve bought a new one with gaskets and more new injection seals, should I have the 2nd and 3rd injectors checked out or...
  2. J

    L322 L322 2008 3.6 TDV8 missing slightly lumpy

    Hi guy’s, as you can see No 4 = 1400 and No 5 850, the other 6 read 600, which I assume is the norm. Should I take the 2 injectors to be tested and refurbed ? I also have a quality blanking kit for the egr’s, would anyone say fit them as a precaution to save the turbo’s as they are ok at the mo...
  3. J

    L322 L322 2008 3.6 TDV8 missing slightly lumpy

    Hi people, can some one please tell me what is the problem and possible cure from a live stream data readout ? Now let’s see if I can upload the data lol
  4. J

    Key will not return to retrieval position and will not start

    I wasn’t going to say, I knew what you meant so would not have been polite lol , but how does that help in any way plz. Got some one who will cut and programme a new key and programme the car too but £120 which I’d be happy to pay if it gets me mobile
  5. J

    Key will not return to retrieval position and will not start

    Hi all, put the reader back on and went into the immobiliser mode which came up with all the programmed info and a fault of “intermittent transponder” any ideas anyone plz.
  6. J

    Key will not return to retrieval position and will not start

    Hi all, it did not start, all the dash lights come on etc but can’t hear any pump running or prime. If I could put some cold start into the 2 air intakes to see if it will fire up at all, and does, will it point to no power at the pump ?? Is that procedure safe to carry out ? Is there any of our...
  7. J

    Key will not return to retrieval position and will not start

    Hey all, I got the key out but dare not now put it in to try it ! Steering is not locked. Usually when you insert the key you hear the lock come off and disarm the immobiliser ready to start, same when you remove the key you should hear the lock engage, but am not hearing it, tried both keys...
  8. J

    Key will not return to retrieval position and will not start

    I think that if I can get it out and go through the normal procedures of lock unlock to disarm the safety protocol, it will start, if my repair of the injector seal was successful.
  9. J

    Key will not return to retrieval position and will not start

    Kds, hi, the lever is in P position and registers so on the dash when key is turned to start. When I first inserted the key, I did not hear the ‘click of acceptance’ that you would normally get if it’s going to start, so I should have removed it then and gone through the mode of new battery and...
  10. J

    Key will not return to retrieval position and will not start

    Oh, I’m gonna fetch the icarsoft lr3 tomorrow and have a go with that.
  11. J

    Key will not return to retrieval position and will not start

    Hi. Fella’s, put new battery on charge, it did take very little extra charge so after awhile I fitted it ! No difference to removing the key but it is plenty adequate as far as power goes, the key will not return fully to extract it. As if the transmission is not in P, so I tried it in N as...
  12. J

    Key will not return to retrieval position and will not start

    Hi Datatek, I believe new bat is fully charged, would think it’ll take a bit more ?
  13. J

    Key will not return to retrieval position and will not start

    Hi all, I’ve just replaced an injector seal to no 2 cyl. 3 month as I’ve taken my time slightly lol. The car is a 2008 Range Rover vogue 3.6 tdv8, all of the lights came on the dash but it would not start, I came to remove the ignition key which would not return fully to the off position and I...
  14. J

    3.6 TDV8 intermittent imbalance cylinder #2

    I also just found a thread on the forum from years ago that prompt me not to rule out the egr’s ???
  15. J

    3.6 TDV8 intermittent imbalance cylinder #2

    Hi all, we now have the icarsoft LR V3.0, I hooked this up to my 3.6 tdv8, it read the vin and inlputed itself automatically and read the no 2 cylinder intermittently imbalance, which leads to my second cry for advise within 2 week. Got the metal plate off of the left bank facing from front into...
  16. J

    P38 v8 Petrol Overheating

    Sorry guys , it was a 2000 P38 with Thor engine 4.0 and obviously lpg seq sys fitted. Sold it for a poorly 3.6 tdv8 lol.
  17. J

    P38 v8 Petrol Overheating

    I knew it, only because I had pressurising over night with car nose on downward gradient, take the exp cap off and sniff (with your nose lol) in the tank and yes a smell of propane, bought a repair kit for my Tomasseto artic reg/reducer and replaced water side large gasket and spring diaphragm...
  18. J

    P38 v8 Petrol Overheating

    Does this car have LPG ?
  19. J

    Td6 air susp inactive front down

    Hi all, we now have the icarsoft LR V3.0, I hooked it up the other night and had to manually input the vehicle and reset the suspension and get it all to work, it’s now 3 days later and still up but susp inactive has returned on dash and diagnosis don’t point to any specific item, very strange...
  20. J

    Td6 air susp inactive front down

    I’d normally agree but changed atf and filter a while back so that’s ok. I went to see the truck last night and connected my obd scanner which said no faults no history faults, scanner did not pick up the VIN, it normally does. No lights on the suspension at all, but pump sounds like it’s...
Back
Top